No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
Texas Instruments |
HIGH-SPEED PWM CONTROLLER • Improved versions of the UC3823/UC3825 PWMs • Compatible with voltage-mode or current-mode control methods • Practical operation at switching frequencies to 1 MHz • 50-ns propagation delay to output • High-current dual totem pole outputs (2-A peak) |
|
|
|
Texas Instruments |
Dual Output Driver • Dual, 1.5A Totem Pole Outputs • 40nsec Rise and Fall into 1000pF • Parallel or Push-Pull Operation DESCRIPTION The UC1706 family of output drivers are made with a high-speed Schottky process to interface between low-level control functions and hig |
|
|
|
Texas Instruments |
ADVANCED REGULATING PULSE WIDTH MODULATORS • Complete PWM Power Control Circuitry • Uncommitted Outputs for Single-Ended or Push-Pull Applications • Low Standby Current . . . 8 mA Typical • Interchangeable With SG1524, SG2524 and SG3524, Respectively DESCRIPTION The UC1524, UC2524 and UC3524 |
|
|
|
Texas Instruments |
SINGLE INVERTER BUFFER/DRIVER • Available in the Texas Instruments NanoStar™ and NanoFree™ Packages • Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation • Ioff Supports Partial-Power-Down Mode Operation • Sub-1-V Operable • Max tpd of 2 |
|
|
|
Texas Instruments |
PHASE SHIFT RESONANT CONTROLLER • Programmable Output Turn On Delay; Zero Delay Available • Compatible with Voltage Mode or Current Mode Topologies • Practical Operation at Switching Frequencies to 300 kHz • 10-MHz Error Amplifier • Pin Programmable Undervoltage Lockout • Low Start |
|
|
|
Texas Instruments |
Phase Shift Resonant Controller •1 QML-V Qualified, SMD 5962-94555 • Rad-Tolerant: 50 kRad (Si) TID (1) • Zero to 100% Duty Cycle Control • Programmable Output Turn-On Delay • Compatible with Voltage or Current Mode Topologies • Practical Operation at Switching Frequencies to 1 MHz |
|
|
|
Texas Instruments |
HIGH-SPEED PWM CONTROLLER • Improved versions of the UC3823/UC3825 PWMs • Compatible with voltage-mode or current-mode control methods • Practical operation at switching frequencies to 1 MHz • 50-ns propagation delay to output • High-current dual totem pole outputs (2-A peak) |
|
|
|
Texas Instruments |
DUAL CHANNEL POWER DRIVER 1 • Two Independent Drivers • 1.5 A Totem Pole Outputs • Inverting and Non-Inverting Inputs • 40 ns Rise and Fall Into 1000 pF • High-Speed, Power MOSFET Compatible • Low Cross-Conduction Current Spike • Analog Shutdown With Optional Latch • Low Qui |
|
|
|
Texas Instruments |
DUAL SCHOTTKY DIODE BRIDGE D Monolithic Eight-Diode Array D Exceptional Efficiency D Low Forward Voltage D Fast Recovery Time D High Peak Current D Small Size DESCRIPTION This eight-diode array is designed for high-current, low duty-cycle applications typical of flyback volta |
|
|
|
Texas Instruments |
Power Supply Supervisory Circuit • Includes Over-Voltage, Under-Voltage, and Current Sensing Circuits • Internal 1% Accurate Reference • Programmable Time Delays • SCR “Crowbar” Drive of 300 mA • Remote Activation Capability • Optional Over-Voltage Latch • Uncommitted Comparator Inp |
|
|
|
Texas Instruments |
Regulating Pulse Width Modulators •1 8-V to 35-V Operation • 5.1-V Reference Trimmed to 1% • 100-Hz to 500-kHz Oscillator Range • Separate Oscillator Sync Terminal • Adjustable Dead-Time Control • Internal Soft Start • Pulse-by-Pulse Shutdown • Input Undervoltage Lockout With Hystere |
|
|
|
Texas Instruments |
Current-Mode PWM Controllers • Optimized for Off-Line and DC-DC Converters • Low Start-Up Current (< 0.5 mA) • Trimmed Oscillator Discharge Current • Automatic Feedforward Compensation • Pulse-by-Pulse Current Limiting • Enhanced Load Response Characteristics • Undervoltage Lock |
|
|
|
Texas Instruments |
Current-Mode PWM Controllers • Optimized for Off-Line and DC-DC Converters • Low Start-Up Current (< 0.5 mA) • Trimmed Oscillator Discharge Current • Automatic Feedforward Compensation • Pulse-by-Pulse Current Limiting • Enhanced Load Response Characteristics • Undervoltage Lock |
|
|
|
Texas Instruments |
ADVANCED HIGH-POWER FACTOR PREREGULATOR 1 • Controls Boost PWM to Near-Unity Power Factor • Limits Line Current Distortion To <3% • World-Wide Operation Without Switches • Accurate Power Limiting • Fixed-Frequency Average Current-Mode Control • High Bandwidth (5 MHz), Low-Offset Current Am |
|
|
|
ETC |
Single Chip Ultra Low Power Passive Color LCD Controller Driver to support optimized COG applications. VDD (digital) range: 1.8V ~ 3.3V VDD (analog) range: 2.5V ~ 3.3V 4.8V ~ 11.8V LCD VOP range: MTP VLCD trimming circuit to support precise LCD contrast matching Available in gold bump dies and COF: Bump pitch: 38 |
|
|
|
ETCTI |
Precision Analog Controller. (Rev. A) |
|
|
|
Texas Instruments |
COMPLIMENTARY SWITCH FET DRIVERS 1 • Single Input (PWM and TTL Compatible) • High Current Power FET Driver, 1-A Source/2-A Sink • Auxiliary Output FET Driver, 0.5-A Source/1-A Sink • Time Delays Between Power and Auxiliary Outputs Independently Programmable from 50 ns to 700 ns • Ti |
|
|
|
Texas Instruments |
Dual-Channel Power Driver •1 Rad-Tolerant: 50 kRad (Si) for 59628761903VEA, 5962-8761903VFA (1) • QML-V Qualified, SMD (5962-8761901VEA, 5962-8761903VEA, 5962-8761903VFA, 5962-8761901V2A) • Two Independent Drivers • 1.5-A Totem Pole Outputs • Inverting and Non-Inverting Input |
|
|
|
Texas Instruments |
DUAL HIGH- SPEED FET DRIVER complete TTL compatibility at the inputs with an output stage that can swing over 30 V. This design also includes thermal shutdown protection. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†} Parameter |
|
|
|
Texas Instruments |
DUAL NON-INVERTING POWER DRIVER 1 • 3.0A Peak Current Totem Pole Output • 5 to 35V Operation • 25ns Rise and Fall Times • 25ns Propagation Delays • Thermal Shutdown and Under-Voltage Protection • High-Speed, Power MOSFET Compatible • Efficient High Frequency Operation • Low Cross- |
|