No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
ETC |
National Aerospace Standards Committee |
|
|
|
Texas Instruments |
OCTAL D-TYPE TRANSPARENT LATCHES AND EDGE-TRIGGERED FLIP-FLOPS 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The high-impedance 3-state and increased high-logic-level drive provide these registers with the capability of being connected directly to and driv |
|
|
|
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHE evels of the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines |
|
|
|
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHES -impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. OE does not affect the internal operatio |
|
|
|
Texas Instruments |
16-BIT D-TYPE TRANSPARENT LATCHES nal bus drivers, and working registers. These devices can be used as two 8-bit latches or one 16-bit latch. The Q outputs of the latches follow the data (D) inputs if enable C is taken high. When C is taken low, the Q outputs are latched at the level |
|
|
|
Texas Instruments |
Octal Transparent D-Type Latches • Wide operating voltage range of 2 V to 6 V • High-current 3-state true outputs can drive up to 15 LSTTL loads • Low power consumption, 80-µA max ICC • Typical tpd = 13 ns • ±6-mA output drive at 5 V • Low input current of 1 µA max • Eight high-curr |
|
|
|
Texas Instruments |
Dual 2-Bit Bistable Transparent Latch Description • True and Complementary Outputs • Buffered Inputs and Outputs • Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads • Wide Operat |
|
|
|
ETC |
Network and UART Transparent Transmission ● Internal Ethernet MAC layer and PHY layer ● Realize bidirectional transparent transmission between serial data and network data ● Support 10/100M, full/half duplex self-adaption Ethernet interface, compatible with 802.3 protocol ● Support automatic |
|
|
|
Texas Instruments |
16-BIT TRANSPARENT D-TYPE LATCHES two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs. 54AC16373 . . . WD PACKAGE 74AC16373 . . |
|
|
|
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHES 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. SN54ALS373A, . . . |
|
|
|
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHE • Wide operating voltage range of 2 V to 6 V • High-current 3-state outputs drive bus lines directly or up to 15 LSTTL loads • Lowpower consumption, 80-μA max ICC • Typical tpd = 21 ns • ±6-mA output drive at 5 V • Low input current of 1 μA max • Bus |
|
|
|
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHE evels of the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines |
|
|
|
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHES edance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. OE does not affect the internal operations o |
|
|
|
Texas Instruments |
Octal Transparent D-Type Latches • Wide operating voltage range of 2 V to 6 V • High-current 3-state true outputs can drive up to 15 LSTTL loads • Low power consumption, 80-µA max ICC • Typical tpd = 13 ns • ±6-mA output drive at 5 V • Low input current of 1 µA max • Eight high-curr |
|
|
|
Texas Instruments |
Octal D-type Transparent Latches • Operation of 2V to 6V V CC • Inputs accept voltages to 6V • Maximum tpd of 9ns at 5V • 3-State outputs drive bus lines directly 2 Applications • Buffer registers • Bidirectional bus drivers • Working registers 3 Description These 8-bit latches fe |
|
|
|
Texas Instruments |
OCTAL D-TYPE TRANSPARENT LATCHES 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight lat |
|
|
|
ETCTI |
OCTAL D-TYPE TRANSPARENT LATCHES (Rev. B) |
|
|
|
ETC |
Video Dispaly D/A Converter |
|
|
|
ETCTI |
3.3-V ABT OCTAL TRANSPARENT D-TYPE LATCHES (Rev. H) |
|
|
|
Texas Instruments |
Dual 2-Bit Bistable Transparent Latch Description • True and Complementary Outputs • Buffered Inputs and Outputs • Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads • Wide Operat |
|