No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
Texas Instruments |
100BASE-T1 Automotive Ethernet Physical Layer Transceiver •1 100BASE-T1 – IEEE 802.3bw Compliant – OPEN Alliance Qualified – Interoperable With BroadR-Reach and 100BASE-T1 PHYs • AEC-Q100 Qualified for Automotive Applications: – Device Temperature Grade 1: –40°C to +125 °C Ambient Operating Temperature – De |
|
|
|
Texas Instruments |
1394 Integrated PHY and Link-Layer Controller • IEEE 1394a-2000 Compliant • Single 3.3-V Supply • Internal 1.8-V Circuit to Reduce Power Consumption • Integrated 400-Mbps Two-Port Physical Layer (PHY) • Internal Voltage Regulator • IEEE 1394 Related Functions: – Automated Read Response for Confi |
|
|
|
ETCTI |
XIO2213B PCI Express to 1394b OHCI With 3-Port PHY (Rev. F) |
|
|
|
ETCTI |
DP83848x PHYTER Mini / LS Single Port 10/100 MB/s Ethernet Transceiver (Rev. E) |
|
|
|
Texas Instruments |
Single Port 10/100Mbs Ethernet Physical Layer Transceiver 1 • Low-Power Consumption: – Single Supply: <205 mW PHY, 275 mW With Center Tap (Typical) – Dual Supplies: <126 mW PHY, 200 mW With Center Tap (Typical) • Programmable Power Back Off to Reduce PHY Power up to 20% in Systems With Shorter Cables • IEEE |
|
|
|
ETC |
5 Port 10/100 Switch with PHY of analog circuitry that makes the design more efficient and allows for lower power consumption and smaller chip die size. • • • • • • • • • • • Unmanaged operation via strapping at system reset time Hardware based 10/100, full/half, flow control and |
|
|
|
ETCTI |
PHYTER QFP Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver (Rev. E) |
|
|
|
Texas Instruments |
Low-Latency Low-Power 10/100Mbps Industrial Ethernet PHY • Low and deterministic latency – TX latency: 40 ns, RX latency: 170 ns – Deterministic latency over power cycles < ±2 ns – Fixed phase XI to TX_CLK relationship < ±2 ns • Robust and small system solution – Integrated circuitry for enhanced EMC – IEC |
|
|
|
Texas Instruments |
Local interconnect network (LIN) physical layer transceiver • AEC-Q100 (Grade 1): Qualified for automotive applications • Local interconnect network (LIN) physical layer specification ISO/DIS 17987 –4 compliant and conforms to SAE J2602 recommended practice for LIN • Functional Safety-Capable – Documentation a |
|
|
|
ETCTI |
PHYTER QFP Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver (Rev. E) |
|
|
|
ETCTI |
DP83848LFQ PHYTER Extended-Temperature Single-Port 10/100-Mbps Ethernet Physical Layer Transceiver (Rev. A) |
|
|
|
ETC |
Power Supply Supervisor+PWM � � � � � � � � PC half-bridge (or 494) power supply � � � � � 280ms PG Time Delay Remote ON/OFF function 280 ms Time Delay for UVP On-chip error amplifier On-chip oscillator ,frequency is adjustable by external resistor � � � � PWM dead-time control |
|
|
|
ETCTI |
Industrial Temp Single Port 10/100Mbs Ethernet PHY Transceiver TLK110 (Rev. D) |
|
|
|
Texas Instruments |
Low-Latency Low-Power 10/100Mbps Industrial Ethernet PHY • Low and deterministic latency – TX latency: 40 ns, RX latency: 170 ns – Deterministic latency over power cycles < ±2 ns – Fixed phase XI to TX_CLK relationship < ±2 ns • Robust and small system solution – Integrated circuitry for enhanced EMC – IEC |
|
|
|
Texas Instruments |
CSI-2/DSI DPHY Re-timer •1 MIPI DPHY 1.1 Specification compliant • Enables low-cost cable solutions • Supports up to 4 lanes at 1.5 Gbps – CSI-2/DSI Clock rates from 100 MHz To 750 MHz • Sub mW Power in shutdown state • MIPI DSI Bi-directional LP mode supported • Supports f |
|
|
|
Texas Instruments |
LIN Physical Interface • AEC-Q100 (Grade 1) qualified for automotive applications • Compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, and ISO/DIS 17987-4 electrical physical layer (EPL) specification • Extended operation with supply from 5 V to 27 V DC • LIN Transmits sp |
|
|
|
ETCTI |
PHYTER QFP Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver (Rev. E) |
|
|
|
ETCTI |
PHYTER QFP Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver (Rev. E) |
|
|
|
ETCTI |
PHYTER Extreme Temperature Single Port 10/100 Mb/s Ethernet Physical Layer (Rev. D) |
|
|
|
ETCTI |
DP83848x PHYTER Mini / LS Single Port 10/100 MB/s Ethernet Transceiver (Rev. E) |
|