No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
ETC |
PIR MOTION DETECTOR ◦ Automatic induction: to enter the sensing range of the output is high, the person leaves the sensing range of the automatic delay off high, output low. ◦ Photosensitive control (optional, not factory-set) can be set photosensitive control, day or |
|
|
|
ETC |
Stepper Motor |
|
|
|
ETC |
Learning remote control with dedicated IC |
|
|
|
ETC |
Hybrid Stepper Motors I High Torque I High Accuracy I Smooth Movement General Specifications Bi-polar Model Number Resistance Inductance Rated per Phase per Phase Current ohm mH A 17HD2011N 1.9 4 1.5 17HD2015N 18 35 0.5 17HD2018N 6 14 0.85 17HD2022N 16 32.0 |
|
|
|
ETC |
Motor |
|
|
|
ETC |
Remote controller MCU Operating voltage: 1.8V to 3.6V Operation frequency: MCU run 2 MIPS Memory Size Program ROM size: 2K X12 bits (OTP type) SRAM size: 32x4 bits Wake up function for power-down mode HALT mode wake up source: RTC timer overflow or PA0~3, PB0~3 |
|
|
|
ETC |
Motor Driver |
|
|
|
ETC |
2 phase hybrid stepper motor drive manual 1 average current control, two-phase sinusoidal current drive output 2 DC 12 ~ 48V power supply, the internal integration of 12V and 5V regulator 3 opticall |
|
|
|
Texas Instruments |
100-W and 50-W Class-D Stereo Automotive Amplifiers •1 Supports Multiple Output Configurations – 2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2-Q1) – 2 × 30 W Into an 8-Ω BTL Load at 24 V (TPA3118D2-Q1) • Wide Voltage Range: 4.5 V to 26 V • Efficient Class-D Operation – >90% Power Efficiency Combined |
|
|
|
ETC |
Stepper Motor |
|
|
|
ETC |
MOTOR DRIVE SERIES |
|
|
|
Texas Instruments |
100BASE-T1 Automotive Ethernet Physical Layer Transceiver •1 100BASE-T1 – IEEE 802.3bw Compliant – OPEN Alliance Qualified – Interoperable With BroadR-Reach and 100BASE-T1 PHYs • AEC-Q100 Qualified for Automotive Applications: – Device Temperature Grade 1: –40°C to +125 °C Ambient Operating Temperature – De |
|
|
|
ETC |
5-channel motor driver  · CD5888CB 2.÷õËŽýÒëÓ¼Íò¿ÜĦ¹ 2. 1¼ Í ò ¿ Ü Ä ¦ ¹ ÈÇÐ¶Ï www.DataSheet4U.com ¾²Ôë 28 27 25k 10k 26 25 24 10k 23 GND 22 1 2 3 4 5 6 10k 25k 10k 25k 7 PGND PGND Vcc1 8 9 µúƬ Çý¶¯Æ÷ 10 11 ½ø¸ Çý¶¯Æ÷ Çý¶¯Æ÷ 12 13 ´«¶¯»ú¹ Çý¶¯Æ÷ Vcc1 Vcc2 Vcc |
|
|
|
ETC |
Remote fan controller 4 PTC 。 PTC 0.5~7.5 、、、 , 3 :、、、, 。 PTC 。 PTC ,,, 。 3 IC1 11~13 , D1、D3、D5 。:/ K3,,IC1 13 LOW , D1~D6 Q1 ,Q2 , MCR2 , ,。 / K3,,IC1 13 , 12 MED , D2—D3—D6 MCR2 , , D2 Q3 Q3 , J1 , J1-1 ,PTC1(1200W),,,,PTC 1200W 。 / K3,,IC1 12 , 1 |
|
|
|
ETC |
STEPPER MOTOR |
|
|
|
Texas Instruments |
Remote and Local Temperature Sensor •1 ±1°C Remote Diode Sensor • ±1°C Local Temperature Sensor • Programmable Non-Ideality Factor • Series Resistance Cancellation • Alert Function • Offset Registers for System Calibration • Pin and Registers Compatible With ADT7461 and ADM1032 • Progr |
|
|
|
Texas Instruments |
Dual H-Bridge Motor Driver •1 Dual-H-Bridge Current-Control Motor Driver – Can Drive Two DC Motors or One Stepper Motor – Low MOSFET ON-Resistance: HS + LS 360 mΩ • Output Current (at VM = 5 V, 25°C) – 1.5-A RMS, 2-A Peak per H-Bridge in PWP and RTY Package Options – 500-mA RM |
|
|
|
ETC |
Mabuchi DC Motor |
|
|
|
ETC |
Motor |
|
|
|
ETC |
Brushed DC Motor Driver IVCC IVDD INA=INB= L;VCC=7V; VDD=10V; INA=H OR INB=H; INA=H OR INB=H; VINH VINL VHYS IINH VINH=2.5V,VCC=3V RIN VINH=3V,VCC=3V MX612 IO=±200mA VDD=6V TA=25℃ RON IO=±1.2A VDD=6.5V TA=25℃ TSD TSDH MOSFET PMOS NMOS VPD I=400mA |
|