| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
Texas Instruments |
Programmable NiCd/NiMH Fast-Charge Management 1 • Safe Management of Fast Charge for NiCd and NiMH Battery Packs • High-Frequency Switching Controller for Efficient and Simple Charger Design • Pre-Charge Qualification for Detecting Shorted, Damaged, or Overheated Cells • Fast-Charge Termination |
|
|
|
|
Texas Instruments |
1:3 LVPECL CLOCK BUFFER + ADDITIONAL LVCMOS OUTPUT AND PROGRAMMABLE DIVIDER • Distributes One Differential Clock Input to Three LVPECL Differential Clock Outputs and One LVCMOS Single-Ended Output • Programmable Output Divider for Two LVPECL Outputs and LVCMOS Output • Low-Output Skew 15 ps (Typical) for Clock-Distribution A |
|
|
|
|
Texas Instruments |
These programmable array logic high speed and a choice of either standard or half-power devices. They combine Advanced Low-Power Schottky technology with proven titanium-tungsten fuses. These devices will provide reliable, high-performance substitutes for conventional TTL logic. T |
|
|
|
|
Texas Instruments |
256-BITS PROGRAMMABLE READ-ONLY MEMORIES 024 PACKAGING INFORMATION Orderable Device JBP18S030MJ Status Package Type Package Pins Package Eco Plan (1) Drawing Qty (2) NRND CDIP J 16 25 Non-RoHS & Green Lead finish/ Ball material (6) SNPB MSL Peak Temp Op Temp (°C) (3) N / A f |
|
|
|
|
ETC |
CMOS Programmable Electrically Erasable Logic Device s Multiple Speed Power, Temperature Options - VCC = 5 Volts ±10% - Speeds ranging from 5ns to 25 ns - Power as low as 37mA at 25MHz - Commercial and industrial versions available CMOS Electrically Erasable Technology - Superior factory testing - Rep |
|
|
|
|
ETC |
CMOS Programmable Electrically Erasable Logic Device Ultra Low Power Operation - VCC = 5 Volts ±10% - Icc = 10 µA (typical) at standby - Icc = 2 mA (typical) at 1 MHz - tPD = 25ns. CMOS Electrically Erasable Technology - Superior factory testing - Reprogrammable in plastic package - Reduces retrofit an |
|
|
|
|
ETC |
High-Speed Octal Programmable Timing Generator • 8 Fully Integrated Timing Generators for ATE Applications • 10/5ns Delay Range, 10ps Resolution • Fully Digital Interface. No Off-Chip DACs or Trim Components Required • ± 4 LSB Differential Non-Linearity High-Speed Octal Programmable Timing Gener |
|
|
|
|
ETC |
Full Featured Programmable Analog Supply Current Monitor Wide IDDX Measurement BW: 0 – 5 MHz High IDDX resolution: 300 µARMS High IDDX Measurement Range: 0 – 2 A High Loading Capacitance: 0 – 100 µF Low internal resistance: 25mΩ APPLICATIONS Continuous Analog Supply Current Measurement Static and transien |
|
|
|
|
Texas Instruments |
Nano-Power Programmable Timer •1 Supply Voltage from1.8 V to 5.0 V • Current Consumption 30 nA (typical, at 2.5 V) • Watchdog Functionality • Reset Functionality • Selectable Timer Intervals 1 to 64 s 2 Applications • Battery-Powered Systems • Energy-Harvesting Systems • Remote D |
|
|
|
|
Texas Instruments |
High Bandwidth Low-Iq Programmable Shunt Regulator •1 Reference voltage tolerance at 25°C – 0.5% (B Grade) – 1% (A Grade) • Minimum typical output voltage: 2.5 V • Adjustable output voltage: Vref to 36 V • Operation from −40°C to +125°C (Q temp) • Maximum temperature drift – 17 mV (I Temp) – 27 mV (Q |
|
|
|
|
Texas Instruments |
+3.3V Programmable LVDS Transmitter 1 •23 No Special Start-up Sequence Required Between Clock/Data and /PD Pins. Input Signal (Clock and Data) Can be Applied Either Before or After the Device is Powered. • Support Spread Spectrum Clocking Up to 100KHz Frequency Modulation & Deviations |
|
|
|
|
Texas Instruments |
PROGRAMMABLE 4-PLL VCXO CLOCK SYNTHESIZER 1 • Qualified for Automotive Applications • Member of Programmable Clock Generator Family – CDCE913/CDCEL913: 1 PLLs, 3 Outputs – CDCE925/CDCEL925: 2 PLLs, 5 Outputs – CDCE937/CDCEL937: 3 PLLs, 7 Outputs – CDCE949: 4 PLLs, 9 Outputs • In-System Progr |
|
|
|
|
ETC1 |
programmable parallel interface #2 |
|
|
|
|
ETC |
CMOS Programmable Electrically Erasable Logic Device s High Speed/Low Power - Speeds ranging from 7ns to 25ns - Power as low as 30mA at 25MHz Electrically Erasable Technology - Superior factory testing - Reprogrammable in plastic package - Reduces retrofit and development costs s s Architectural Fl |
|
|
|
|
ETC |
(AY-3-8910 - AY-3-8913) PROGRAMMABLE SOUND GENERATOR |
|
|
|
|
ETC |
LCD Gamma Buffer integrated multiple-time programmable (MTP) memory to store gamma and VCOM values on the chip, eliminating the need for external EEPROM. The MAX9668 supports up to 100 write operations to the on-chip nonvolatile memory. The gamma outputs can drive 20 |
|
|
|
|
Texas Instruments |
Programmable ROM 83C Class B High-Reliability Processing (SMJ27C128) description The TMS27C128 series are 131 072-bit, ultraviolet-light erasable, electrically programmable read-only memories. The TMS27PC128 series are 131 072-bit, one time electrically progra |
|
|
|
|
Texas Instruments |
Nano-Power Programmable Timer •1 Supply Voltage from 1.8 V to 5.0 V • Selectable Timer Intervals, 16 to 1024 seconds • Current Consumption 30 nA (typical, at 2.5 V) 2 Applications • Battery-Powered Systems • Energy Harvesting Systems • Remote Data-Logger • Sensor Node • Power-Gat |
|
|
|
|
Texas Instruments |
High Bandwidth Low-Iq Programmable Shunt Regulator •1 Reference voltage tolerance at 25°C – 0.5% (B Grade) – 1% (A Grade) • Minimum typical output voltage: 2.5 V • Adjustable output voltage: Vref to 36 V • Operation from −40°C to +125°C (Q temp) • Maximum temperature drift – 17 mV (I Temp) – 27 mV (Q |
|
|
|
|
Texas Instruments |
Programmable Shunt Regulator •1 Qualified for automotive applications • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature • Reference voltage tolerance at 25°C – 0.5% (B grade) – 1% (A grade) • Minimum typi |
|