No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
ETC |
8-Bit Microcontroller CPU configuration z 2K*14 bits on-chip ROM z 80*8 bits on-chip registers (SRAM) z 8-level stacks for subroutine nesting z Less than 1.9 mA at 5V/4MHz z Typically 15uA, at 3V/32kHz z Typically 1 uA, during Sleep mode I/O port configuration z 3 bidirec |
|
|
|
Texas Instruments |
Microprocessor Supervisory Circuits 1 •2 Standard Reset Threshold Voltage: 3.08V • Custom Reset Threshold Voltages: For other voltages between 2.2V and 5.0V in 10mV increments, contact TI • No External Components Required • Manual-Reset Input • RESET (LM3710) or RESET (LM3711) Outputs |
|
|
|
Texas Instruments |
16- and 32-Bit RISC Flash Microcontroller 1 • High-Performance Automotive-Grade Microcontroller for Safety-Critical Applications – Dual CPUs Running in Lockstep – ECC on Flash and RAM Interfaces – Built-In Self-Test (BIST) for CPU and On-chip RAMs – Error Signaling Module With Error Pin – Vo |
|
|
|
ETC |
Lithium-ion Rechargeable Cell mA(ambient temperature 25℃) 2.75V 48.0g max Height : 65.00mm max Diameter : 18.25mm max Charge : 0 to 45℃ Discharge: -20 to 60℃ 1 year : -20~25℃(1*) 3 months : -20~45℃(1*) 1 month : -20~60℃(1*) Note (1): If the cell is kept as ex-factory status(50% |
|
|
|
Texas Instruments |
16- and 32-Bit RISC Flash Microcontroller 1 • High-Performance Microcontroller for SafetyCritical Applications – Dual CPUs Running in Lockstep – ECC on Flash and RAM Interfaces – Built-In Self-Test for CPU and On-Chip RAMs – Error Signaling Module With Error Pin – Voltage and Clock Monitorin |
|
|
|
Texas Instruments |
Mixed-Signal Microcontrollers 1 • Low Supply Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode (AM): All System Clocks Active: 270 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical) – Standby Mode (LPM3): Watchdog With Crystal and Supply Supervisor |
|
|
|
Texas Instruments |
Mixed-Signal Microcontrollers 1 • Low Supply-Voltage Range: 3.6 V Down to 1.8 V • Ultra-Low Power Consumption – Active Mode (AM): All System Clocks Active 265 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical) 140 µA/MHz at 8 MHz, 3.0 V, RAM Program Execution (Typical) – S |
|
|
|
Texas Instruments |
MIXED SIGNAL MICROCONTROLLER 1 • Low Supply-Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 230 µA at 1 MHz, 2.2 V – Standby Mode: 0.5 µA – Off Mode (RAM Retention): 0.1 µA • Five Power-Saving Modes • Ultra-Fast Wake-Up From Standby Mode in Less Than 1 |
|
|
|
ETC |
general purpose 32-bit microprocessors his datasheet, or any error or omission in such information, or any incorrect use of the product. Change Log Issue A (Draft 0.1) (Draft 0.2) B C D draft1 D E Date Sept 1994 Oct 1994 Dec 1994 Dec 1994 Mar 1995 Mar 1995 Mar 1995 Aug 1995 By EH/BJH EH |
|
|
|
ETC |
ADC-8051 10-bit microcontrollers 3/VLPD/AN3/TMS 10 P1.2/INT2/AN2/TDO 9 P3.7/T1/PWM 4.2 ZEN3305A/09A-DIP/SOP 20Pin, ZEN3308A-TSSOP 20Pin RESET/P4.0 RXD/P3.0 TXD/P3.1 XTAL2/P4.1 XTAL1/P4.2 INT0/P3 2 INT1/P3 3 T0/P3.4 PWM/T1/P3.5 GND 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 |
|
|
|
Texas Instruments |
16- and 32-Bit RISC Flash Microcontroller 1 • High-Performance Microcontroller for SafetyCritical Applications – Dual CPUs Running in Lockstep – ECC on Flash and RAM Interfaces – Built-In Self-Test (BIST) for CPU and On-chip RAMs – Error Signaling Module With Error Pin – Voltage and Clock Mo |
|
|
|
ETC |
MICRO PRECISION VOLTAGE TRANSFORMERS |
|
|
|
ETC |
Microprocessor |
|
|
|
Texas Instruments |
Mixed-Signal Microcontrollers • Embedded microcontroller – 16-bit RISC architecture up to 16 MHz – Wide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the Section 8.12.1.1) • Optimized low-power modes (at 3 V) – Active mode: |
|
|
|
Texas Instruments |
Mixed-Signal Microcontrollers 1 • Low Supply Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode (AM): All System Clocks Active: 270 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical) – Standby Mode (LPM3): Watchdog With Crystal and Supply Supervisor |
|
|
|
Texas Instruments |
Adjustable Micropower Voltage References 1 •2 Adjustable from 1.24V to 5.30V • Operating Current of 10μA to 20mA • 1Ω Dynamic Impedance • Low Temperature Coefficient DESCRIPTION The LM185 are micropower 3-terminal adjustable band-gap voltage reference diodes. Operating from 1.24 to 5.3V an |
|
|
|
Texas Instruments |
Mixed-Signal Microcontrollers 1 • Core – Arm® 32-bit Cortex®-M4F CPU with floating point unit and memory protection unit – Frequency up to 48 MHz – ULP benchmark – 150.6 ULPBench™-CP Performance benchmark – 3.41 CoreMark/MHz – 1.22 DMIPS/MHz (Dhrystone 2.1) • Advanced low-power a |
|
|
|
Texas Instruments |
Microcontrollers • High-efficiency 32-bit CPU (TMS320C28x) – 60MHz (16.67ns cycle time) – 16 × 16 and 32 × 32 MAC operations – 16 × 16 dual MAC – Harvard bus architecture – Atomic operations – Fast interrupt response and processing – Unified memory programming model |
|
|
|
Texas Instruments |
Microcontrollers Processor Cores: • Single, dual, and quad-core Arm® Cortex®-R5F MCU with each core running up to 400 MHz – 16KB I-cache with 64-bit ECC per CPU core – 16KB D-cache with 32-bit ECC per CPU core – 64KB Tightly-Coupled Memory (TCM) with 32bit ECC per CP |
|
|
|
Texas Instruments |
Mixed-Signal Microcontrollers • Core – Arm® 32-bit Cortex®-M0+ CPU, frequency up to 32 MHz • Operating characteristics – Extended temperature: –40°C to 125°C – Wide supply voltage range: 1.62 V to 3.6 V • Memories – Up to 64KB of flash – Up to 4KB of SRAM • High-performance analo |
|