No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
Texas Instruments |
Filter-Free Class-D Stereo Amplifier •1 Supports Multiple Output Configurations – 2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2) – 2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2) – 2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2) • Wide Voltage Range: 4.5 V to 26 V • Efficient Class- |
|
|
|
Texas Instruments |
Filter-Free Class-D Stereo Amplifier •1 Supports Multiple Output Configurations – 2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2) – 2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2) – 2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2) • Wide Voltage Range: 4.5 V to 26 V • Efficient Class- |
|
|
|
ETC |
High Speed Metal Gear Dual Ball Bearing Servo nge: 0 ºC – 55 ºC |
|
|
|
ETC |
Silicon N-Channel IGBT High Speed Power Switching |
|
|
|
Texas Instruments |
15-W Fil ter-Free Stereo Class-D Audio Power Amplifier •1 15-W/ch into an 8-Ω Loads at 10% THD+N From a 16-V Supply • 10-W/ch into 8-Ω Loads at 10% THD+N From a 13-V Supply • 30-W into a 4-Ω Mono Load at 10% THD+N From a 16-V Supply • 90% Efficient Class-D Operation Eliminates Need for Heat Sinks • Wide |
|
|
|
ETC |
Three-terminal positive voltage regulator Maximum Output current IOM: 0.1 A Output voltage Vo: 9 V Continuous total dissipation PD: 0.5 W SOT-89 1.OUT 2.GND 1 2 3.IN 3 ABSOLUTE MAXIMUM RATINGS (Operating temperature range applies unless otherwise specified) Parameter Symbol Value Unit |
|
|
|
ETC |
High efficiency low standby power primary side feedback AC/DC drive IC 0.330 0.510 0.170 0.250 4.700 5.100 3.700 4.100 5.800 6.200 1.270(BSC) 0.400 1.270 0° 8° Dimensions In Inches Min Max 0.053 0.069 0.004 0.010 0.053 0.061 0.013 0.020 0.006 0.010 0.185 0.200 0.150 0.157 0.228 0.224 0. |
|
|
|
ETC |
National Aerospace Standards Committee |
|
|
|
Texas Instruments |
Filter-Free Class-D Stereo Amplifier •1 Supports Multiple Output Configurations – 2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2) – 2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2) – 2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2) • Wide Voltage Range: 4.5 V to 26 V • Efficient Class- |
|
|
|
Texas Instruments |
Dual High-Speed MOSFET Drivers d TPS2813 drivers include a regulator to allow operation with supply inputs between 14 V and 40 V. The regulator output can power other circuitry, provided power dissipation does 1IN1 1IN2 2IN1 2IN2 1 2 3 4 8 GND 7 1OUT 6 VCC 5 2OUT TPS2815 . . . |
|
|
|
ETC |
Green Low Power Switching Power Supply Controller |
|
|
|
ETC |
Green Energy Saving Current Mode PWM Power Converter |
|
|
|
Texas Instruments |
High-Speed CMOS Logic Octal Buffer/Line Drivers • HC/HCT240 Inverting • HC/HCT241 Non-inverting • HC/HCT244 Non-inverting • Typical propagation delay = 8ns at VCC = 5 V, CL = 15 pF, TA = 25℃ for HC240 • Three-state outputs • Buffered inputs • High-current bus driver outputs • Fanout (over temperat |
|
|
|
Texas Instruments |
High-Speed CMOS Logic Octal Buffer/Line Drivers • HC/HCT240 Inverting • HC/HCT241 Non-inverting • HC/HCT244 Non-inverting • Typical propagation delay = 8ns at VCC = 5 V, CL = 15 pF, TA = 25℃ for HC240 • Three-state outputs • Buffered inputs • High-current bus driver outputs • Fanout (over temperat |
|
|
|
ETC |
TRANSFORMER |
|
|
|
ETC |
Two-Wire Serial EEPROM Low-voltage and Standard-voltage Operation – 1.8 (VCC = 1.8V to 5.5V) Operating Ambient Temperature: -40°C to +85°C Internally Organized 256 X 8 (2K), 512 X 8 (4K) Two-wire Serial Interface Schmitt Trigger, Filtered Inputs for Noise Suppres |
|
|
|
Texas Instruments |
10-W 3.5-V to 14.4-V Inductor Free Stereo Class-D Speaker Amplifier •1 Wide Supply Range 3.5-V to 14.4-V – 2 × 10 W into 6-Ω, 1% THD+N, 12-V Supply – 1 x 18.5 W into 4-Ω, 10% THD+N, 12-V Supply – THD+N : 0.04% at 1 W, 1 kHz input, 6-Ω • Longer Battery Life for Portable Applications: – 20-mA (12-V) Idle Current in 1SP |
|
|
|
Texas Instruments |
Dual 4-A High Speed Low-Side MOSFET Drivers •1 Industry-Standard Pin-Out • Enable Functions for Each Driver • High Current Drive Capability of ±4 A • Unique BiPolar and CMOS True Drive Output Stage Provides High Current at MOSFET Miller Thresholds • TTL/CMOS Compatible Inputs Independent of Su |
|
|
|
Texas Instruments |
High-Speed Amplifiers • Ultra-low 1.2nV/√Hz voltage noise • High speed: – 2GHz gain-bandwidth product – 470V/μs slew rate – 30ns settling time (0.1%) • Stable at gains ≥10V/V • Output drive, IO = 200mA (typical) • Very low distortion: – THD = –68dBc (f = 1MHz, RL = 150Ω) |
|
|
|
Texas Instruments |
High-Speed Comparators • Fast propagation delay: 2.5 ns • Low overdrive dispersion: 600 ps • High toggle frequency: 325 MHz • Narrow pulse width detection capability: 1.25 ns • Push-pull output • Wide supply range: 2.4 V to 5.5 V • Input common-mode range extends 200 mV be |
|