| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
Texas Instruments |
5-Amp Adjustable Regulator •1 Specified 7-A Peak Output Current • Specified 5-A Output Current • Adjustable Output Down to 1.2 V • Specified Thermal Regulation • Current Limit Constant With Temperature • P + Product Enhancement Tested • Output is Short-Circuit Protected 2 App |
|
|
|
|
Texas Instruments |
5-Amp Adjustable Regulator •1 Specified 7-A Peak Output Current • Specified 5-A Output Current • Adjustable Output Down to 1.2 V • Specified Thermal Regulation • Current Limit Constant With Temperature • P + Product Enhancement Tested • Output is Short-Circuit Protected 2 App |
|
|
|
|
ETC |
LM338K of the LM138 family is time-dependent current limiting. The current limit circuitry allows peak currents of up to 12A to be drawn from the regulator for short periods of time. This allows the LM138 to be used with heavy transient loads and speeds sta |
|
|
|
|
Texas Instruments |
8-Output PCIe Gen1/Gen2/Gen3/Gen4/Gen5 Clock Buffer and Level Translator • 3:1 Input Multiplexer – Two Universal Inputs Operate up to 400 MHz and Accept LVPECL, LVDS, CML, SSTL, HSTL, HCSL, or Single-Ended Clocks – One Crystal Input Accepts a 10-MHz to 40-MHz Crystal or Single-Ended Clock • Two Banks With 4 Differential O |
|
|
|
|
ETC |
Trimming Potentiometers - 9mm (3/8”) Square, Single-Turn. - Cermet Trimmer/Industrial/Sealed. - Higher rated power thanks to the use of cermet resistor element. - Excellent reliability for heat and humidity. - Tighter resistance tolerances available. - RoHS compliant versi |
|
|
|
|
ETC |
Washer 8 .894 167 I .003 I .024 169 1.1?9 !.153 I 69 1.254 I .280 170 1.379 I .M8 171 I .504 I .534 WASHER SECIION (%] “AK .,72 ,?09 .250 .293 .334 .487 .583 .680 .776 .8s9 .96$ 1.073 1.265 !.~ss ,.656 1.847 2.036 2.219 ‘1.419 Wh “IN .035 |
|
|
|
|
Texas Instruments |
P-Channel Power MOSFET •1 Low On-Resistance • Ultra-Low Qg and Qgd • Ultra-Small Footprint (0402 Case Size) – 1.0 mm × 0.6 mm • Low Profile – 0.35 mm Max Height • Integrated ESD Protection Diode – Rated >2 kV HBM – Rated >2 kV CDM • Pb Terminal Plating • Halogen Free • RoH |
|
|
|
|
Texas Instruments |
10-BIT FET BUS SWITCH ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resisto |
|
|
|
|
Texas Instruments |
10-Bit Bus-Exchange Switch •1 High-Bandwidth Data Path (Up to 200 MHz) • Low and Flat ON-State Resistance (rON) Characteristics Over Operating Range (rON = 5 Ω Typical) • Control Inputs Can Be Driven by TTL or 5-V and 3.3-V CMOS Outputs • Bidirectional Data Flow With Near-Zero |
|
|
|
|
ETC |
DVD-RAM MASTERING GENERATOR Generate the embossed data The unit automatically generated the signal to make the Pre-Pit (embossed data) for the Inside circumference on the DVD-RAM disc by connection with personal computer (RF-1st signal). Record the groove and the pit of header |
|
|
|
|
ETC |
Compact 33600 BPS Data and Fax Modem • • • • • • • • • • Small Size; 1.385 " x 1.36" x 0.575" Modem control with "AT" commands Class 1 Fax commands Data transfer up to 33,600 bps Send and receive fax to 14,400 bps MNP and V.42 Error Control MNP10 Error Control for Cellular Links MNP5 Da |
|
|
|
|
Texas Instruments |
16/32-Bit RISC Flash Microcontroller – Core Supply Voltage (VCC): 1.81 V - 2.06 V – Core Supply Voltage (VCC): 1.70 V - 2.06 V for VF3x8xE when used from - 40C to 85C – I/O Supply Voltage (VCCIO): 3.0 V - 3.6 V – Low-Power Modes: STANDBY and HALT – Industrial and Automotive Temperature |
|
|
|
|
Texas Instruments |
16/32-BIT RISC ROM MICROCONTROLLER – Core Supply Voltage (VCC): 1.81 V - 2.06 V – Core Supply Voltage (VCC): 1.70 V - 2.06 V When Used from −40 to 85C – I/O Supply Voltage (VCCIO): 3.0 V - 3.6 V – Low-Power Modes: STANDBY and HALT – Industrial and Automotive Temperature Ranges O 470+ |
|
|
|
|
Texas Instruments |
Low-Dropout Linear Regulator •1 150-mA, low-dropout regulator • Output voltage: 5 V, 3.8 V, 3.3 V, 3 V, 2.8 V, 2.7 V, 2.5 V, 1.8 V, 1.6 V, and variable • Dropout voltage, typically 300 mV at 150 mA • Thermal protection • Overcurrent limitation • Less than 2-µA quiescent current |
|
|
|
|
Texas Instruments |
10-BIT FET BUS SWITCH reel −40°C to 85°C SSOP (QSOP) − DBQ Tape and reel SN74CBT3384ADBR SN74CBT3384ADBQR CU384A CBT3384A TSSOP − PW Tube Tape and reel SN74CBT3384APW SN74CBT3384APWR CU384A TVSOP − DGV Tape and reel SN74CBT3384ADGVR CU384A † Package drawings, st |
|
|
|
|
Texas Instruments |
10-BIT FET BUS SWITCH Tape and reel SN74CBTS3384DW SN74CBTS3384DWR CBTS3384 SSOP – DB Tape and reel SN74CBTS3384DBR CR384 –40°C to 85°C SSOP (QSOP) – DBQ TSSOP – PW Tape and reel Tube Tape and reel SN74CBTS3384DBQR SN74CBTS3384PW SN74CBTS3384PWR CBTS3384 CR384 T |
|
|
|
|
Texas Instruments |
10-BIT FET BUS-EXCHANGE SWITCH ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, BE should be tied to VCC through a pullup resisto |
|
|
|
|
ETCTI |
Dual 5-Bit Bus Switch |
|
|
|
|
ETC |
CMOS System Reset (1) Super low consumption current (2) High precision detection voltage (3) Hysteresis characteristic (4) Operating range (5) Wide operating temperature range (6) Detection voltage 0.25µA typ. (when VDD = Vs + 1V) ±2% 5% typ. 0.95 ~ 10V -30 ~ +85°C 2 |
|
|
|
|
Texas Instruments |
16/32-Bit RISC Flash Microcontroller – Core Supply Voltage (VCC): 1.81 V - 2.06 V – Core Supply Voltage (VCC): 1.70 V - 2.06 V for VF3x8xE when used from - 40C to 85C – I/O Supply Voltage (VCCIO): 3.0 V - 3.6 V – Low-Power Modes: STANDBY and HALT – Industrial and Automotive Temperature |
|