| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
Diodes |
Low power DisplayPort 1.2 Redriver NoteBook PC DP++ Redriver ÎÎ Dual |
|
|
|
|
Diodes |
DP/HDMI 1:2 De-multiplexer switches ÎÎDP/HDMI 1:2 De-multiplexer switch with 4 high speed differential channel and AUX/DDC, HPD and CAB_DET signal channels ÎÎOne passive output ports for DP1.2 at 5.4Gbps ÎÎOne active output port with integrated DP to HDMI re- driver (level shifter) sup |
|
|
|
|
DIODES |
2:1 MIPI D-PHY and C-PHY Switch The DIODES PI3WVR646 is a 4-data lane D-PHY or 3−data lane C−PHY MIPI switch. This 10-channel single-pole, doublethrow (SPDT) switch is optimized for switching between highspeed (HS) or low-power (LP) MIPI signal. The PI3WVR646 is designed for the M |
|
|
|
|
DIODES |
3.3V Quad 2:1 Mux/DeMux Fast Ethernet LAN Switch • RON is 4Ω typical • Low crosstalk: –27dB @ 250 MHz • Near-Zero propagation delay: 250ps • Switching speed: 9ns • Channel On capacitance: 9pF (typical) • VCC Operating Range: +3.0V to +3.6V • >2kV ESD protection (human body model) • >350 MHz bandwid |
|
|
|
|
Diodes |
HDMI 2.0 6Gbps Linear Redriver Level Shifter |
|
|
|
|
Diodes |
DisplayPort 1.4 HBR3 Linear Redriver ÎÎ Compliant with VESA DisplayPort 1. |
|
|
|
|
Diodes |
3.3V Dual 4:1 Mux/DeMux The DIODES PI3B3253 is a 3.3V, Dual 4:1 Multi-plexer/Demultiplexer with Hi-Z outputs that is pinout compatible with the PI74FCT253T, 74F253, and 74ALS/AS/LS 253. Inputs can be connected to outputs with low On-Resistance (5Ω) with no additional groun |
|
|
|
|
Diodes |
3.3V Quad 2:1 Mux/DeMux ¼¼Near-Zero propagation delay ¼¼5Ω switches connect inputs to outputs ¼¼Fast Switching Speed: 4.8ns max. ¼¼Ultra-Low Quiescent Power: 0.1µA typical – Ideally suited for notebook applications ¼¼Pin compatible with 74 series 257 logic devices ¼¼Packagi |
|
|
|
|
Diodes |
HDMI 2.0 6Gbps Limiting ReDriver The DIODES PI3HDX1204B1 is a ReDriver™ device suitable for HDMI 2.0 6.0 Gbps with programmable high equalization, output swing and de-emphasis control mode. The maximum EQ of the device is +22dB @ 6Gbps and it can deliver 2x better additive jitter p |
|
|
|
|
Diodes |
DisplayPort 1.2 Video Switch Description yy 4-lane, 1:2 mux/demux that will support RBR, HBR1, or HBR2 yy Data rate: 3.4 Gbps to 6.0 Gbps for high data channels yy 1-channel 1:2 mux/demux for HPD signal yy Differential switch matrix for DP AUX and HDMI DDC yy Supports 720 Mbps |
|
|
|
|
Diodes |
DisplayPort 1.2 Video Switch Description yy 4-lane, 1:2 mux/demux that will support RBR, HBR1, or HBR2 yy Data rate: 3.4 Gbps to 6.0 Gbps for high data channels yy Supports DDC with HPD channel mux/demux @ HDMI yy Supports 720 Mbps high-speed DP AUX @ DP yy -1.7 dB Insertion L |
|
|
|
|
DIODES |
4-Bit Bus Switch Pin Configuration PI3CH400 4-Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Description Applications Pin Description Pin No 1, 4, 10 2, 5, 9, 12 3, 6, 8, 11 14 7 Pin Name 1111111 EN0, EN1, |
|
|
|
|
DIODES |
Bus Switch ÎÎNear-Zero propagation delay ÎÎ5-ohm switches connect inputs to outputs ÎÎHigh Bandwidth Operation (>400 MHz) ÎÎPermits Hot Insertion ÎÎ5V I/O Tolerant ÎÎRail-to-Rail 3.3V or 2.5V Switching ÎÎ2.5V Supply Voltage Operation ÎÎTotally Lead-Free & Fully |
|
|
|
|
DIODES |
USB 2.0 High-Speed Switch Description y USB 2.0 Compliant (high speed, full speed, and low speed) y RON: 4.0Ω typical @ VDD = 3.0V y Channel On Capacitance: 6.0pF y Wide -3dB Bandwidth: 1,000MHz y Low Bit-to-bit Skew y Low Crosstalk: -29B @ 480 Mbps y Off Isolation: -28dB @ |
|
|
|
|
DIODES |
3.3V Hot Insertion 8-Bit 2-Port NanoSwitch The DIODES PI3B3245 is a 3.3V 8-bit, 2-port bus switch designed with a low On-Resistance (5Ω) allowing inputs to be connected directly to outputs. The bus switch creates no additional propagational delay or additional ground bounce noise. The switch |
|
|
|
|
Diodes |
DP-Alt DP1.4/USB3.1 10Gbps Linear Redriver |
|
|
|
|
Diodes |
HDMI 1.4b 3.4Gbps Retimer Jitter Cleaner |
|
|
|
|
KODENSHI |
PIN PHOTO DIODES ● モールドタイプ Plastic mold package ● High-speed response ● High output power APPLICATIONS Smoke detectors MAXIMUM RATINGS （Ta＝25℃） Item Symbol Rating Unit Reverse voltage VR 35 V Operating temp. Topr. －30～＋70 ℃ Storage temp. Tstg |
|
|
|
|
Diodes |
12.5Gbps 4-channel SAS3 ReDriver ÎÎ1-12.5Gbps serial link with linear equalizer ÎÎSupport SATA Gen1/Gen2/Gen3, SAS2/3, and XAUI protocol ÎÎSupporting 4 differential channels ÎÎHandle up to 34dB channel loss (42" FR4 trace or 10 meters or SAS3 cable) ÎÎIndependent channel configurati |
|
|
|
|
Diodes |
4-Channel 2:1 Mux/DeMux 。 。 PI3CH480 4-Channel 2:1 Mux/DeMux, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Description Truth Table EX S HX LL LH YA YB YC YD Hi-Z Hi-Z Hi-Z Hi-Z IA0 IB0 IC0 ID0 IA1 IB1 IC1 ID1 Function Disable S=0 S=1 N |
|