| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
BCD Semiconductor |
RF ULDO REGULATOR an undervoltage monitor with an error flag output, logic compatible enable/shutdown control inputs, a low power shutdown mode for extended battery life, over current protection, over temperature protection as well as reversed-battery protection. The |
|
|
|
|
BCD Semiconductor |
2A DDR TERMINATION REGULATOR · · · · · Support Both DDR I (1.25VTT) and DDR II (0.9VTT) Requirements Source and Sink Current up to 2A High Accuracy Output Voltage at Full-load Adjustable VOUT by External Resistors Shutdown for Standby or Suspend Mode Operation with High-impedanc |
|
|
|
|
BCD Semiconductor |
LOW DROPOUT LINEAR REGULATOR · · · · · · · Minimum Guaranteed Output Current: 1A Dropout Voltage at IOUT=1A: 300mV Output Accuracy: ± 1% Low Ground Current Internal Current Limit and Thermal Protection Reversed-battery and Reversed-lead Insertion Protection Fast Transient Respon |
|
|
|
|
BCD Semiconductor |
3A DDR TERMINATION REGULATOR · · · · · Support Both DDR I (1.25VTT) and DDR II (0.9VTT) Requirements Source and Sink Current up to 3A High Accuracy Output Voltage at Full-load Adjustable VOUT by External Resistors Shutdown for Standby or Suspend Operation with High-impedance Out |
|
|
|
|
BCD Semiconductor |
LOW NOISE LDO REGULATOR individual logic compatible enable/shutdown control inputs, a low power shutdown mode for extended battery life, over current protection, over temperature protection, as well as reversed-battery protection. The AP2213 has 2.5V, 3.0V and 3.3V versions |
|
|
|
|
BCD Semiconductor |
1.5A DDR TERMINATION REGULATOR · · · · · Support Both DDR I (1.25VTT) and DDR II (0.9VTT) Requirements Source and Sink Current up to 1.5A High Accuracy Output Voltage at Full-load Adjustable VOUT by External Resistors Shutdown for Standby or Suspend Mode Operation with High-impeda |
|
|
|
|
BCD Semiconductor |
DUAL 300mA LDO REGULATORS · · · · · · · · Minimum Output Current Capability per Channel: 300mA High Output Voltage Accuracy: ±2% Low Quiescent Current per Channel: 50µA Typical Low Standby Current: 0.1µA Typical High PSRR: 70dB Typical （f=1kHz) Extremely Low Noise: 30µVrms (1 |
|
|
|
|
BCD Semiconductor |
EXTREMELY LOW NOISE LDO REGULATOR Data Sheet AP2122 The AP2122 series are positive voltage regulator ICs fabricated by CMOS process. Each of these ICs con- · Low Dropout Voltage at IOUT=100mA: 150mV Typical (Except 1.5V Version) sists of a voltage reference, an error amplifier, |
|
|
|
|
BCD Semiconductor |
RF ULDO REGULATOR Data Sheet AP2210 The AP2210 is a 300mA ULDO regulator which provides very low noise, ultra low dropout voltage (typically 250mV at 300mA), very low standby current (1µA maximum) and excellent power supply ripple rejection (PSRR 75dB at 100Hz) in b |
|
|
|
|
BCD Semiconductor |
RF ULDO REGULATOR Data Sheet AP2202 The AP2202 is a 150mA ULDO regulator which provides very low noise, ultra low dropout voltage (typically 165mV at 150mA), very low standby current (1µA maximum) and excellent power supply ripple rejection (PSRR 75dB at 100Hz) in b |
|
|
|
|
BCD Semiconductor |
LOW DROPOUT LINEAR REGULATOR · · · · · · · · Low Dropout Voltage: 1.1V at 600mA Output Current Output Noise from 10Hz to 10KHz: 0.003% of VOUT PSRR at IOUT=300mA and f=120Hz: 75dB Output Voltage Accuracy: ± 1% On-chip Thermal Shutdown Maximum Quiescent Current: IQMAX=5mA ESD (Hu |
|
|
|
|
BCD Semiconductor |
LOW DROPOUT LINEAR REGULATOR · · · · · · · · Low Dropout Voltage: 1.1V at 600mA Output Current Output Noise from 10Hz to 10KHz: 0.003% of VOUT PSRR at IOUT=300mA and f=120Hz: 75dB Output Voltage Accuracy: ± 1% On-chip Thermal Shutdown Maximum Quiescent Current: IQMAX=5mA ESD (Hu |
|
|
|
|
BCD Semiconductor |
Octave Remote Resistor-programmable Temperature Switches • • • • • • 8 Remote Temperature Switches Set by Thermistor and External Resistors 4 Open-drain Active Low Output Stages for Each 2 Temperature Switches Selectable External/Internal Trigger Voltages Setting Built-in Hysteresis Temperature when Using |
|
|
|
|
BCD Semiconductor |
WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR Data Sheet AP2204 The AP2204 series is a positive voltage regulator IC · Wide Input Voltage Range: 2.3V to 24V fabricated by high voltage EPNP process. · Wide Output Voltage Range: 1.24V to 22V · Excellent Ripple Rejection: 60dB@ f=1kHz The AP2 |
|
|
|
|
BCD Semiconductor |
RF ULDO REGULATOR individual logic compatible enable/shutdown control inputs, a low power shutdown mode for extended battery life, over current protection, over temperature protection, as well as reversed-battery protection. AP2201 Features · · · · · · · · · · · · · |
|
|
|
|
BCD Semiconductor |
LOW DROPOUT LINEAR REGULATOR · · · · · · · · Low Dropout Voltage: 1.1V at 600mA Output Current Output Noise from 10Hz to 10KHz: 0.003% of VOUT PSRR at IOUT=300mA and f=120Hz: 75dB Output Voltage Accuracy: ± 1% On-chip Thermal Shutdown Maximum Quiescent Current: IQMAX=5mA ESD (Hu |
|
|
|
|
BCD Semiconductor |
DUAL LDO REGULATORS · · · · · · · · Maximum Output Current/Channel: More Than 150mA (300mA Limit) High Output Voltage Accuracy: ±2% Low Quiescent Current/Channel: 25µA Typical Low Standby Current: 0.1µA Typical High PSRR: 70dB Typical （f=1kHz) Extremely Low Noise: 30µVr |
|