The uP7558 is a current limited high-side switch designed for applications where heavy capacitive loads and shortcircuits are likely to be met. This device operates with inputs from 2.7V to 5.5V for both 3V and 5V systems. Its low quiescent current and shutdown current(<1uA) conserve battery power in portable. The power switch is controlled by a logic enable.
glitch-blank fault flag that is asserted by over current and over temperature. The 8ms glitchblanking time allows momentary faults to be ignored, thus preventing false alarms to the host system. Other features include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present, and output reverse voltage to turn off the power switch when the output voltage is higher than input voltage. The uP7558 is available in.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UP7550-1 |
UniverChipSemi |
100mA Low Power CMOS LDO | |
2 | uP7558T |
uPI Semiconductor |
Power Distribution Switches | |
3 | uP7558U |
uPI Semiconductor |
Power Distribution Switches | |
4 | uP7501 |
uPI Semiconductor |
Smart 5V Dual Controller | |
5 | UP7533-1 |
UniverChipSemi |
100mA Low Power CMOS LDO | |
6 | UP7534 |
uPI Semiconductor |
Power Distribution Switches | |
7 | uP7535 |
uPI Semiconductor |
Dual-Input Triple-Output Power Multiplexer | |
8 | uP7537 |
uPI Semiconductor |
Dual-Input Triple-Output Power Multiplexer | |
9 | uP7561Q |
uPI Semiconductor |
Two-Channel Input Power Management Controller | |
10 | uP7566 |
uPI Semiconductor |
Power Distribution Switches | |
11 | uP7567 |
uPI Semiconductor |
Power Distribution Switch | |
12 | UP7 |
UCHIYA |
motor protector |