The μClamp0601ZV is a unidirectional TVS specifically designed for single power line protection up to +6.3V. It features large cross-sectional area junctions for conducting high transient currents while occupying minimal board space in a slim 1006(mm) package. Desirable characteristics for board level protection include fast response time, low operating and .
large cross-sectional area junctions for conducting high transient currents while occupying minimal board space in a slim 1006(mm) package. Desirable characteristics for board level protection include fast response time, low operating and clamping voltage, and no device degradation. Protection characteristics are highlighted by high surge capability (25A, tp = 8/20μs), low ESD clamping (<10V at 20A, tp = 8/20μs) and high ESD withstand voltage (±30kV Contact & air per IEC 61000-4-2). μClamp0601ZV is in a 2-pin SLP1006P2X3F package, measuring1.0 x 0.6 x 0.25mm. Leads are spaced at a pitch of 0.6.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | uClamp0301PQ |
SEMTECH |
Low Voltage TVS | |
2 | uClamp03321PQ |
SEMTECH |
1-Line ESD & Surge Protection | |
3 | UCLAMP0501H |
Semtech Corporation |
1-Line ESD protection | |
4 | UCLAMP0501P |
Semtech Corporation |
1-Line ESD protection | |
5 | UCLAMP0501T |
Semtech Corporation |
1-Line ESD protection | |
6 | UCLAMP0502P |
Semtech Corporation |
2-Line ESD protection | |
7 | UCLAMP0502T |
Semtech Corporation |
2-Line ESD protection | |
8 | UCLAMP0504A |
Semtech Corporation |
4-Line ESD protection Array | |
9 | UCLAMP0504T |
Semtech Corporation |
Low Profile Clamp 4-Line ESD Protection | |
10 | UCLAMP0505A |
Semtech Corporation |
5-Line ESD protection Array | |
11 | UCLAMP0506A |
Semtech Corporation |
5-Line ESD protection Array | |
12 | UCLAMP0506P |
Semtech Corporation |
6-Line ESD protection Array |