The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to within tolerance by laser cutting .
is resistive layer. The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is a Lead-tin or Tin (lead free) alloy. Fig 1. Consctruction of a Chip-R Page 2 of 8 WR12X / WR08X / WR06X Version 17 Jul.-2004 www.DataSheet4U.com Walsin Technology Corporation QUICK REFERENCE DATA Item Series No. Size code Resistance Tolerance Resistance Range TCR (ppm/°C) >10Ω >10Ω ≦10Ω Max. dissipation at Tamb=70°C Max. Operation Voltage (DC or RMS) Max. Overload Voltage (DC or RMS) Climatic .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | WR12 |
Walsin Technology |
General purpose chip resistors | |
2 | WR-160PB-VF50 |
ETC |
WR Series 0.5mm Low Profile SMT PCB Connectors | |
3 | WR-PA4008UW-C |
MEI SEMI |
Backlight | |
4 | WR-PB1608C |
ETC |
LED | |
5 | WR-PB1608G |
ETC |
LED | |
6 | WR-PB1608UE-C |
MEI SEMI |
Backlight | |
7 | WR04 |
Walsin Technology |
General purpose chip resistors | |
8 | WR04X |
Walsin Technology |
General purpose chip resistors | |
9 | WR04X474JT |
PILKOR Electronics |
(WR0x Series) Chip Resistors | |
10 | WR06 |
Walsin Technology |
General purpose chip resistors | |
11 | WR06X |
Walsin Technology |
(WR0xX) General Purpose Chip Resistors | |
12 | WR06X473 |
PILKOR Electronics |
(WR0xxxxx) Chip Resistors |