The W29F102 is a 1-megabit, 5-volt only CMOS flash memory organized as 64K × 16 bits. The device can be programmed and erased in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture of the W29F102 results in fast program/erase operations with extremely low current consumption (compared to other comparable 5-volt.
•
Single 5-volt operations: − 5-volt Read − 5-volt Erase − 5-volt Program
•
Low power consumption − Active current: 25 mA (typ.) − Standby current: 20 µA (typ.)
•
•
•
Fast Program operation: − Word-by-Word programming: 50 µS (max.) Fast Erase operation: 100 mS (typ.) Fast Read access time: 45/50/55/70 nS Endurance: 1K/10K cycles (typ.) Ten-year data retention Hardware data protection 8K word Boot Block with Lockout protection
•
•
•
•
Automatic program and erase timing with internal VPP generation End of program or erase detection − Toggle bit − Data polling Latched address and data TTL .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | W2911 |
MF Electronics |
(W29xx) Oscillator | |
2 | W2912 |
MF Electronics |
(W29xx) Oscillator | |
3 | W2913 |
MF Electronics |
(W29xx) Oscillator | |
4 | W2958NC280 |
IXYS |
Rectifier Diode | |
5 | W2958NC300 |
IXYS |
Rectifier Diode | |
6 | W2958NC320 |
IXYS |
Rectifier Diode | |
7 | W2971 |
MF Electronics |
(W29xx) Oscillator | |
8 | W2972 |
MF Electronics |
(W29xx) Oscillator | |
9 | W2973 |
MF Electronics |
(W29xx) Oscillator | |
10 | W29C010 |
Winbond |
128K X 8 CMOS FLASH MEMORY | |
11 | W29C011A |
Winbond |
128K x 8 CMOS FLASH MEMORY | |
12 | W29C020 |
Winbond |
256K x 8 CMOS FLASH MEMORY |