The UTC UH266 is a one-chip composed of Hall sensor and output coil drivers, applied to two-phase brush-less DC motor. The device includes an on-chip Hall plate for magnetic sensing, a amplifier for Hall voltage, and a Schmitt trigger to provide switching hysteresis, and complementary darlington open-collector drivers for sinking large current loads. An inte.
* Operating voltage: 4V~28V
* Output current: 400mA(Continuous, 25°C)
* Output protection Zener breakdown Vz=62V(Typ)
* Reverse power protection
ORDERING INFORMATION
Ordering Number UH266G-G04-K
Package SIP-4
1
SIP-4
Packing Bulk
MARKING
www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd
1 of 5
QW-R118-016.D
UH266
PIN DESCRIPTION
PIN NO. 1 2 3 4
PIN NAME VCC DO DOB GND
DESCRIPTION Positive Power Supply Output Pin Output Pin Ground
BLOCK DIAGRAM
VCC
Regulator
Over-Temperature Protection
LINEAR INTEGRATED CIRCUIT
DO
Hall Plate
Amplifier
Schmitt Trigger.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UH200 |
Unisonic Technologies |
2-PHASE DC MOTOR DRIVER | |
2 | UH20FCT |
Vishay Siliconix |
Dual Common-Cathode Ultrafast Recovery Rectifier | |
3 | UH210 |
Unisonic Technologies |
2-PHASE DC MOTOR DRIVER | |
4 | UH211 |
Unisonic Technologies |
HIGH SENSITIVITY HALL EFFECT SENSOR | |
5 | UH251 |
UTC |
LOW-VOLTAGE 1.5 CHANNEL BI-DIRECTIONAL MOTOR DRIVER | |
6 | UH255 |
UTC |
SMART MOTOR DRIVER | |
7 | UH276 |
UTC |
COMPLEMENTARY OUTPUTS HALL EFFECT LATCH | |
8 | UH277 |
UTC |
COMPLEMENTARY OUTPUTS HALL EFFECT LATCH | |
9 | UH288F |
UTC |
COMPLEMENTARY OUTPUT HALL EFFECT FAN DRIVER | |
10 | UH288R |
UTC |
COMPLEMENTARY OUTPUT HALL EFFECT FAN DRIVER | |
11 | UH2B |
Vishay Siliconix |
(UH2B - UH2D) Surface Mount Ultrafast Rectifier | |
12 | UH2C |
Vishay Siliconix |
(UH2B - UH2D) Surface Mount Ultrafast Rectifier |