The UCD9112 is dual-phase synchronous buck digital PWM controller that supports point of load (POL) applications. The device is configured thru the use of a graphical user interface (GUI). The loop compensator is configurable with the GUI to meet dynamic converter performance allowing a single hardware design to cover a broad range of POL applications. In ad.
• Digital dual phase synchronous buck PWM controller with 175ps PWM resolution
• Digital control with programmable PID compensation
• Dual-phase with current balancing capability
• Vin from 4.5V to 14.5V (UCD7230)
• Vout from 1% to 99% of Vin
• Programmable switching frequency, capable of up to 2MHz/Phase
• Programmable soft start and soft stop
• Supports pre-biased start-up
• Internally trimmed 0.5% 800mV Reference
• Remote sensing differential amplifier
• Power supply monitoring via PMBus
• Single bias supply (3.3V VDD)
• Graphical user interface configuration
• Internal thermal sensor
• PMB.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UCD90120 |
Texas Instruments |
12-Channel Sequencer and System Health Monitor | |
2 | UCD90120A |
Texas Instruments |
12-Rail Power-Supply Sequencer/Monitor | |
3 | UCD90124 |
Texas Instruments |
12-Rail Sequencer and System Health Monitor | |
4 | UCD90124A |
Texas Instruments |
12-Rail Power-Supply Sequencer/Monitor | |
5 | UCD90160 |
Texas Instruments |
16-Rail Power-Supply Sequencer/Monitor | |
6 | UCD90240 |
Texas Instruments |
24-Rail PMBus Power Sequencer and System Manager | |
7 | UCD90320 |
Texas Instruments |
Power Sequencer and System Manager | |
8 | UCD9080 |
Texas Instruments |
8-CHANNEL POWER-SUPPLY SEQUENCER/MONITOR | |
9 | UCD9081 |
Texas Instruments |
8-Channel Power-Supply Sequencer/Monitor | |
10 | UCD9090 |
Texas Instruments |
10-Channel Power-Supply Sequencer/Monitor | |
11 | UCD9090-Q1 |
Texas Instruments |
10-Channel Power-Supply Sequencer/Monitor | |
12 | UCD90910 |
Texas Instruments |
10-Rail Sequencer and System Health Monitor |