The UCD7232 high current driver is specifically designed for digitally-controlled, point-of-load, synchronous buck switching power supplies. Two driver circuits provide high charge and discharge current for the high-side NMOS switch and the low-side NMOS synchronous rectifier in a synchronous buck circuit. The MOSFET gates are driven by an internally regulat.
1
• Dual High Current Drivers.
• Full Compatibility with TI Fusion Digital Power
Supply Controllers, such as UCD91xx and UCD92xx Families
• Operational to 2 MHz Switching Frequency
• High-Side FET and Output Current Limit Protection with Independently Adjustable Thresholds
• Fast High-Side Overcurrent Sense Circuit with Fault Flag Output
– Prevents Catastrophic Current Levels on a Cycle-by-Cycle Basis
• Differential High-Gain Current Sense Amplifier
• Voltage Proportional to Load Current Monitor Output
• Wide Input Voltage Range: 4.7 V to 15 V Operation to 2.2 V Input Supported with an Externa.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UCD7230 |
Texas Instruments |
Digital Control Compatible Synchronous Buck Gate Drivers | |
2 | UCD7230A |
Texas Instruments |
Digital Control Compatible Synchronous Buck Gate Driver | |
3 | UCD7231 |
Texas Instruments |
Digital Control Compatible Synchronous-Buck Gate Driver | |
4 | UCD7201 |
Texas Instruments |
Amp MOSFET Drivers | |
5 | UCD7242 |
Texas Instruments |
Digital Dual Synchronous-Buck Power Driver | |
6 | UCD7242-EP |
Texas Instruments |
Digital Dual Synchronous-Buck Power Driver | |
7 | UCD7100 |
Texas Instruments |
Digital Control Compatible Single Low-Side MOSFET Driver | |
8 | UCD7138 |
Texas Instruments |
4-A and 6-A Single-Channel Synchronous-Rectifier Driver | |
9 | UCD74106 |
Texas Instruments |
Synchronous-Buck Power-Stage | |
10 | UCD74111 |
Texas Instruments |
High-Current Synchronous Buck Power-Stage | |
11 | UCD74120 |
Texas Instruments |
Synchronous Buck Power-Stage | |
12 | UCD |
Nichicon |
ALUMINUM ELECTROLYTIC CAPACITORS |