The UCC3921 family of negative floating hot swap power managers provides complete power management, hot swap, and fault handling capability. The IC is referenced to the negative input voltage and is powered through an external resistor connected to ground, which is essentially a current drive as opposed to the traditional voltage drive. The onboard 10V shunt.
• Precision Fault Threshold
• Programmable: Average Power Limiting, Linear Current Control, Overcurrent Limit and Fault Time
• Fault Output Indication Signal
• Automatic Retry Mode or Latched Operation Mode
• Shutdown Control
• Undervoltage Lockout
• 250µs Glitch Filter on the SDFLTCH pin
• 8-Pin DIL and SOIC
DESCRIPTION
The UCC3921 family of negative floating hot swap power managers provides complete power management, hot swap, and fault handling capability. The IC is referenced to the negative input voltage and is powered through an external resistor connected to ground, which is essentiall.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UCC2926 |
Unitrode |
+-20A Integrated Current Sensor | |
2 | UCC29002 |
Texas Instruments |
Advanced 8-Pin Load-Share Controller | |
3 | UCC29002-1 |
Texas Instruments |
Advanced 8-Pin Load-Share Controller | |
4 | UCC2912 |
Unitrode |
Programmable Hot Swap Power Manager | |
5 | UCC2913 |
Texas Instruments |
Negative Voltage Hot Swap Power Manager | |
6 | UCC2915 |
Unitrode |
15-V Programmable Hot Swap Power Manager | |
7 | UCC2941-3 |
Unitrode |
(UCCx941-x) 1V Synchronous Boost Converter | |
8 | UCC2941-5 |
Unitrode |
(UCCx941-x) 1V Synchronous Boost Converter | |
9 | UCC29421 |
Unitrode |
Multimode High Frequency PWM Controller | |
10 | UCC29422 |
Unitrode |
Multimode High Frequency PWM Controller | |
11 | UCC2946 |
Texas Instruments |
Microprocessor Supervisor | |
12 | UCC2946-Q1 |
Texas Instruments |
Microprocessor Supervisor |