The UCC3895 is a phase-shift PWM controller that implements control of a full-bridge power stage by phase shifting the switching of one half-bridge with respect to the other. The device allows constant frequency pulse-width modulation in conjunction with resonant zero-voltage switching to provide high efficiency at high frequencies. The part is used either a.
•1 Programmable-output turnon delay
• Adaptive delay set
• Bidirectional oscillator synchronization
• Voltage-mode, peak current-mode, or average
current-mode control
• Programmable soft start, soft stop, and chip
disable via a single pin
• 0% to 100% duty-cycle control
• 7-MHz error amplifier
• Operation to 1 MHz
• Typical 5-mA operating current at 500 kHz
• Very low 150-μA current during UVLO
2 Applications
• Phase-shifted full-bridge converters
• Off-line, telecom, datacom, and servers
• Distributed power architecture
• High-density power modules
3 Description
The UCC3895 is a phase-shift .
The UCC3895 is a phase shift PWM controller that implements control of a full-bridge power stage by phase shifting the s.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UCC1800 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers | |
2 | UCC1801 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers | |
3 | UCC1802 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers | |
4 | UCC1803 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers | |
5 | UCC1804 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers | |
6 | UCC1805 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers | |
7 | UCC1806 |
Texas Instruments |
CURRENT-MODE PWM CONTROLLER | |
8 | UCC1807-1 |
Unitrode |
Programmable Maximum Duty Cycle PWM Controller | |
9 | UCC1807-2 |
Unitrode |
Programmable Maximum Duty Cycle PWM Controller | |
10 | UCC1807-3 |
Unitrode |
Programmable Maximum Duty Cycle PWM Controller | |
11 | UCC1808-1 |
Unitrode |
Low Power Current Mode Push-Pull PWM | |
12 | UCC1808-2 |
Unitrode |
Low Power Current Mode Push-Pull PWM |