These two families of high speed drivers are designed to provide drive waveforms for complementary switches. Complementary switch configurations are commonly used in synchronous rectification circuits and active clamp/reset circuits, which can provide zero voltage switching. In order to facilitate the soft switching transitions, independently programmable de.
• Single Input (PWM and TTL Compatible)
• High Current Power FET Driver, 1.0A Source/2A Sink
• Auxiliary Output FET Driver, 0.5A Source/1A Sink
• Time Delays Between Power and Auxiliary Outputs Independently Programmable from 50ns to 500 ns
• Time Delay or True Zero-Voltage Operation Independently Configurable for Each Output
• Switching Frequency to 1MHz
• Typical 50 ns Propagation Delays
• ENBL Pin Activates 220 µA Sleep Mode
• Power Output is Active Low in Sleep Mode
• Synchronous Rectifier Driver
BLOCK DIAGRAM
INPUT 6 T1 7
T2 5
50ns-500ns 50ns-500ns
UC3714 ONLY
BIAS ENBL 3V
GND
LOG.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UC3710 |
Unitrode |
High Current FET Driver | |
2 | UC3711 |
Unitrode |
Dual Ultra High-Speed FET Driver | |
3 | UC3715 |
ETC |
Complementary Switch FET Drivers | |
4 | UC3717 |
Unitrode |
Stepper Motor Drive Circuit | |
5 | UC3717A |
Unitrode |
Stepper Motor Drive Circuit | |
6 | UC3702 |
Unitrode |
Quad PWM Relay Driver | |
7 | UC3704 |
Unitrode |
Bridge Transducer Switch | |
8 | UC3705 |
Unitrode |
High Speed Power Driver | |
9 | UC3705 |
Texas Instruments |
HIGH SPEED POWER DRIVER | |
10 | UC3706 |
Texas Instruments |
Dual Output Driver | |
11 | UC3706 |
Unitrode |
Dual Output Driver | |
12 | UC3707 |
Texas Instruments |
DUAL CHANNEL POWER DRIVER |