The U2795B is a 2.5-GHz mixer for WLAN and RF telecommunications equipment, e.g., DECT and PCN. The IC is manufactured using Atmel's advanced bipolar technology. A double-balanced approach was chosen to assure good isolation characteristics and a minimum of spurious products. The input and output are single-ended, and their characteristics are programmable. .
•
•
•
•
•
•
•
Supply-voltage Range: 2.7 V to 5.5 V Single-ended Output, no Balun Required Single-ended Input for RF and LO Excellent Isolation Characteristics Power-down Mode IP3 and Compression Point Programmable 2.5-GHz Operating Frequency
Benefits
•
•
•
•
Reduced System Costs as only Few External Component (no Balun) are Required Small Package Very Low Current Consumption Easy to Use
Electrostatic sensitive device. Observe precautions for handling.
2.5-GHz Doublebalanced Mixer U2795B
Description
The U2795B is a 2.5-GHz mixer for WLAN and RF telecommunications equipment, e.g., DECT and P.
U2795B is a 2.5-GHz mixer for WLAN and RF telecommunications equipment, e.g., DECT and PCN, built with TELEFUNKEN’s adva.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | U2790B |
ATMEL Corporation |
1000-MHz QUADRATURE MODULATOR | |
2 | U2793B |
ATMEL Corporation |
300 MHZ QUADRATURE MODULATOR | |
3 | U2793B-MFS |
ATMEL Corporation |
300 MHZ QUADRATURE MODULATOR | |
4 | U2793B-MFSG3 |
ATMEL Corporation |
300 MHZ QUADRATURE MODULATOR | |
5 | U2793B-NFSG3H |
ATMEL Corporation |
300 MHZ QUADRATURE MODULATOR | |
6 | U2793B-NFSH |
ATMEL Corporation |
300 MHZ QUADRATURE MODULATOR | |
7 | U2794 |
TEMIC Semiconductors |
1000 MHz Quadrature Demodulator | |
8 | U2794B |
TEMIC Semiconductors |
1000 MHz Quadrature Demodulator | |
9 | U2794B |
ATMEL Corporation |
1000 MHZ QUADRATURE DEMODULATOR | |
10 | U2794B-AFS |
TEMIC Semiconductors |
1000 MHz Quadrature Demodulator | |
11 | U2794B-AFSG3 |
TEMIC Semiconductors |
1000 MHz Quadrature Demodulator | |
12 | U2794B-MFS |
ATMEL Corporation |
1000 MHZ QUADRATURE DEMODULATOR |