TXS0101 - Texas Instruments

TXS0101 Voltage-Level Translator

This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track VCCB. VCCA must be less than or equal to VCCB. VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low voltage bidirectional trans.

Features

•1 Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
  – A Port
  – 2500 V Human-Body Model (A114-B)
  – 200 V Machine Model (A115-A)
  – 1500 V Charged-Device Model (C101)
  – B Port
  – 8 kV Human-Body Model (A114-B)
  – 200 V Machine Model (A115-A)
  – 1500 V Charged-Device Model (C101)
• No Direction-Control Signal Needed
• Maximum Data Rates
  – 24 Mbps (Push Pull)
  – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoFree™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature
  – If Either VCC Input Is at GND,.