Pin 1 2 3 4 5 6 7 Name GND1 VCC1 NC NC NC NC NC Description GND1 is the RF ground pin. GND2 and GND3 should be connected to GND1 by short, low-inductance traces. VCC1 is the positive supply voltage pin for the transmitter output amplifier and the transmitter base-band circuitry. VCC1 is usually connected to the positive supply through a ferrite RF decouplin.
e Peak RF Output Power, 450 µA TXMOD Current Peak Current, 450 µA TXMOD Current OOK Turn On/Turn Off Times ASK Output Rise/Fall Times 2 nd th Value -0.3 to +4.0 -50 to +100 250 Units V o o C C Sym fO Notes Minimum 916.30 Typical Maximum 916.70 Units MHz OOK & ASK 20 115.2 kbps kbps PO ITP tON/tOFF tTR/tTF 1.5 12 15/10 1.1/1.1 -50 -55 -50 dBm mA µs µs dBm dBm dBm µA 16 10 200 µs µs mV mV 3.7 +85 Vdc o - 4 Harmonic Outputs 5th - 10th Harmonic Outputs Non-harmonic Spurious Outputs Sleep Mode Current Sleep to Transmit Switch Time Transmit to Sleep Switch Time Control Input Logic Low.
The R.F. Solutions 458MHz FM Transmitter and receivers are compact ‘credit card’ sized crystal controlled modules, capab.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TX6001 |
RF Monolithics |
868.35 MHz Hybrid Transmitter | |
2 | TX6004 |
RF Monolithics |
914.00 MHz Hybrid Transmitter | |
3 | TX6-ATS306T |
Actions Semiconductor |
7-Function Remote Controller | |
4 | TX6206 |
ChipSourceTek |
3-terminal positive voltage regulators | |
5 | TX6250 |
ChipSourceTek |
1A Low Power High PSRR LDO | |
6 | TX6251 |
ChipSourceTek |
1A Low Power LDO | |
7 | TX66D11VCOCAB |
HannStar |
TFT LCD Module | |
8 | TX6A11 |
CHILIN |
Full HD Display | |
9 | TX6A12 |
CHILIN |
Full HD Display | |
10 | TX6ATS306T |
Actions Semiconductor |
7-Function Remote Controller | |
11 | TX-1033S |
ETC |
Modem Transformer | |
12 | TX-17LA1F |
Panasonic |
LCD TV SERVICE MANUAL |