The TUSB1046-DCI is a VESA USB Type-C™ Alt Mode redriving switch supporting USB 3.1 data rates up to 10 Gbps and DisplayPort 1.4 up to 8.1 Gbps for downstream facing port (Host). The device is used for configurations C, D, E, and F from the VESA DisplayPort Alt Mode on USB Type-C Standard Version 1.1. This protocol-agnostic linear redriver is also capable o.
• USB Type-C crosspoint switch supporting
– USB 3.1 SSP + 2 DisplayPort lanes
– 4 DisplayPort lanes
• USB 3.1 Gen 1/Gen 2 up to 10 Gbps
• DisplayPort 1.4 up to 8.1 Gbps (HBR3)
• VESA® DisplayPort Alt mode DFP redriving crosspoint switch supporting C, D, E and F configurations
• Ultra-low-power architecture
• Linear redriver with up to 14 dB equalization
• Transparent to DisplayPort link training
• Automatic LFPS de-emphasis control to meet USB 3.1 certification requirements
• Configuration through GPIO or I2C
• Hot-plug capable
• Industrial temperature range: −40°C to 85°C (TUSB1046I-DCI)
• Co.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TUSB1046A-DCI |
Texas Instruments |
Linear Redriver Crosspoint Switch | |
2 | TUSB1042I |
Texas Instruments |
2:1 Linear Redriver Switch | |
3 | TUSB1044 |
Texas Instruments |
Multi-Protocol Bi-Directional Linear Redriver | |
4 | TUSB1002 |
Texas Instruments |
Dual-Channel Linear Redriver | |
5 | TUSB1064 |
Texas Instruments |
Sink-Side Linear Redriver Crosspoint Switch | |
6 | TUSB1105 |
Texas Instruments |
ADVANCED UNIVERSAL SERIAL BUS TRANSCEIVERS | |
7 | TUSB1106 |
Texas Instruments |
ADVANCED UNIVERSAL SERIAL BUS TRANSCEIVERS | |
8 | TUSB1106-Q1 |
Texas Instruments |
ADVANCED UNIVERSAL SERIAL BUS TRANSCEIVERS | |
9 | TUSB1146 |
Texas Instruments |
Linear Redriver Crosspoint Switch | |
10 | TUSB1210 |
Texas Instruments |
Stand-Alone USB Transceiver | |
11 | TUSB1210-Q1 |
Texas Instruments |
Stand-Alone USB Transceiver | |
12 | TUSB1211 |
Texas Instruments |
Stand-Alone USB Transceiver |