The TSL2562 and TSL2563 are low-voltage light-to-digital converters that transform light intensity to a digital signal output capable of direct I2C (TSL2563) or SMBus (TSL2562) interface. Each device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit capable of providing a near.
(visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit capable of providing a near-photopic response over an effective 20-bit dynamic range (16-bit resolution). Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response. The TSL2562 device permits an SMB-Alert style interrupt, and the TSL2563 device support.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TSL2560 |
TAOS |
LIGHT TO DIGITAL CONVERTER | |
2 | TSL2561 |
TAOS |
LIGHT TO DIGITAL CONVERTER | |
3 | TSL2561 |
Adafruit |
Luminosity Sensor | |
4 | TSL2561 |
ETC |
Luminosity Sensor Hookup Guide | |
5 | TSL2561 |
ams |
Light-to-Digital Converter | |
6 | TSL2562 |
TAOS |
LOW-VOLTAGE LIGHT-TO-DIGITAL CONVERTER | |
7 | TSL2568 |
TAOS |
LIGHT-TO-DIGITAL CONVERTER | |
8 | TSL2569 |
TAOS |
LIGHT-TO-DIGITAL CONVERTER | |
9 | TSL250-080 |
Tyco Electronics |
PTC Devices | |
10 | TSL250-080 |
Tyco Electronics |
POLYSWITCH | |
11 | TSL250-080F |
Tyco Electronics |
POLYSWITCH | |
12 | TSL250-080F |
Littelfuse |
Resettable PPTC |