The TSL1402R linear sensor array consists of two sections of 128 photodiodes each and associated charge amplifier circuitry, aligned to form a contiguous 256 × 1 pixel array. The device incorporates a pixel data-hold function that provides simultaneous integration start and stop times for all pixels. The pixels measure 63.5 μm by 55.5 μm, with 63.5-μm center.
spacing between pixels. Operation is simplified by internal logic requiring only a serial-input pulse (SI) and a clock. The TSL1402R is intended for use in a wide variety of applications including mark and code reading, OCR and contact imaging, edge detection and positioning, and optical encoding. Functional Block Diagram (each section − pin numbers apply to section 1) Pixel 1 S1 1 Integrator Reset 2 2 Pixel 2 Pixel 3 Pixel 128 1 Analog Bus Output Buffer 4 AO VDD _ + 1 3 S2 Sample/Hold/ Output 5 GND Switch Control Logic Gain Trim 13 SO Hold Q1 Q2 Q3 Q128 CLK SI 3 2 128-Bit Sh.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TSL1401 |
ETCTI |
128 X 1 Linear Sensor Array with Hold | |
2 | TSL1401CL |
TAOS |
128 x 1 LINEAR SENSOR ARRAY | |
3 | TSL1401CS |
TAOS |
128 x 1 LINEAR SENSOR ARRAY WITH HOLD | |
4 | TSL1401CS-LF |
TAOS |
128 x 1 LINEAR SENSOR ARRAY WITH HOLD | |
5 | TSL1401R |
ETC |
128 1 LINEAR SENSOR ARRAY WITH HOLD | |
6 | TSL1401R-LF |
TAOS |
128 x 1 LINEAR SENSOR ARRAY WITH HOLD | |
7 | TSL1406R |
TAOS |
768 x 1 LINEAR SENSOR ARRAY WITH HOLD | |
8 | TSL1406RS |
TAOS |
768 x 1 LINEAR SENSOR ARRAY WITH HOLD | |
9 | TSL1410R |
TAOS |
1280 x 1 LINEAR SENSOR ARRAY WITH HOLD | |
10 | TSL1412S |
TAOS |
1536 x 1 LINEAR SENSOR ARRAY | |
11 | TSL14S |
TAOS |
LIGHT-TO-VOLTAGE CONVERTERS | |
12 | TSL1014 |
STMicroelectronics |
14 + 1 channel buffers for TFT-LCD panels |