TPS54526 - Texas Instruments

TPS54526 5.5-A Synchronous Step-Down Converter

The TPS54526 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54526 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, low standby current solution. The main control loop for the TPS54526 uses the D-CAP2™ mode control which provides a very fast trans.

Features

•1 D-CAP2™ Mode Enables Fast Transient Response
• Low Output Ripple and Allows Ceramic Output Capacitor
• Wide VIN Input Voltage Range: 4.5 V to 18 V
• Output Voltage Range: 0.76 V to 5.5 V
• Highly Efficient Integrated FET’s Optimized for Lower Duty Cycle Applications
  – 63 mΩ (High Side) and 33 mΩ (Low Side)
• High Efficiency, less than 10 μA at shutdown
• High Initial Bandgap Reference Accuracy
• Adjustable Soft Start
• Pre-Biased Soft Start
• 650-kHz Switching Frequency (fSW)
• Cycle By Cycle Over Current Limit
• Power Good Output
• Auto-Skip Eco-mode™ for High Efficiency at Light Load 2 Ap.