The TPS54328 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54328 enables system designers to complete the suite of various end-equipment power bus regulators with a cost effective, low component count, low standby current solution. The main control loop for the TPS54328 uses the D-CAP2 mode control that provides a fast transient resp.
•1 D-CAP2™ Mode Enables Fast Transient Response
• Low Output Ripple and Allows Ceramic Output Capacitor
• Wide Input Voltage Range: 4.5 V to 18 V
• Output Voltage Range: 0.76 V to 7 V
• Highly Efficient Integrated FETs Optimized for
Lower Duty Cycle Applications
– 100 mΩ (High-Side) and 70 mΩ (Low-Side)
• High Efficiency, Less Than 10 µA at Shutdown
• High Initial Bandgap Reference Accuracy
• Adjustable Soft Start
• Pre-Biased Soft Start
• 700-kHz Switching Frequency (fSW)
• Cycle-By-Cycle Overcurrent Limit
• Auto-Skip Eco-Mode™ for High Efficiency at Light Load
2 Applications
• Wide Range of .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPS5432 |
Texas Instruments |
700kHz Synchronous Step-Down Converter | |
2 | TPS54320 |
Texas Instruments |
3-A Synchronous Step-Down Converter | |
3 | TPS54325 |
Texas Instruments |
3-A Output Synchronous Step-Down Switcher | |
4 | TPS54325-Q1 |
Texas Instruments |
3-A Output Synchronous Step-Down Switcher | |
5 | TPS54326 |
Texas Instruments |
3-A SYNCHRONOUS STEP-DOWN CONVERTER | |
6 | TPS54327 |
Texas Instruments |
3-A Output Single Synchronous Step-Down Switcher | |
7 | TPS54329 |
Texas Instruments |
3-A SYNCHRONOUS STEP-DOWN CONVERTER | |
8 | TPS54329E |
Texas Instruments |
3-A SYNCHRONOUS STEP-DOWN CONVERTER | |
9 | TPS5432DDA |
Texas Instruments |
700kHz Synchronous Step-Down Converter | |
10 | TPS5430 |
Texas Instruments |
3-A Wide Input Range Step-Down Converter | |
11 | TPS5430-EP |
Texas Instruments |
WIDE-INPUT-RANGE STEP-DOWN CONVERTER | |
12 | TPS5430-Q1 |
Texas Instruments |
3-A Wide-Input-Range Step-Down Converter |