The TPS51211 is a small-sized single buck controller with adaptive on-time D-CAP™ mode. The device is suitable for low output voltage, high current, PC system power rail and similar point-of-load (POL) power supply in digital consumer products. A small package with minimal pin-count saves space on the PCB, while a dedicated EN pin and pre-set frequency minim.
1
•2 Wide Input Voltage Range: 3 V to 28 V
• Output Voltage Range: 0.7 V to 2.6 V
• Wide Output Load Range: 0 to 20A+
• Built-in 0.5% 0.7 V Reference
• 290-kHz, Adaptive On-Time D-CAP™ MODE
Control
• 4700 ppm/°C RDS(on) Current Sensing
• Internal 1-ms Voltage Servo Soft-start
• Pre-Charged Start-up Capability
• Built in Output Discharge
• Power Good Output
• Integrated Boost Switch
• Built-in OVP/UVP/OCP
• Thermal Shutdown (Non-latch)
• SON-10 (DSC) Package
APPLICATIONS
• Notebook Computers
• I/O Supplies
• System Power Supplies
DESCRIPTION
The TPS51211 is a small-sized single buck controller.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPS51216 |
Texas Instruments |
Memory Power Solution Synchronous Buck Controller | |
2 | TPS51216-EP |
Texas Instruments |
Memory Power Solution Synchronous Buck Controller | |
3 | TPS51217 |
Texas Instruments |
Single Synchronous Step-Down Controller | |
4 | TPS51218 |
Texas Instruments |
Single Synchronous Step-Down Controller | |
5 | TPS51219 |
Texas Instruments |
Single Synchronous Step-Down Controller | |
6 | TPS5120 |
Texas Instruments |
Two-Phase Synchronous Buck DC/DC Controller | |
7 | TPS5120-EP |
Texas Instruments |
Two-Phase Synchronous Buck DC/DC Controller | |
8 | TPS5120-Q1 |
Texas Instruments |
Two-Phase Synchronous Buck DC/DC Controller | |
9 | TPS51200 |
Texas Instruments |
Sink and Source DDR Termination Regulator | |
10 | TPS51200-Q1 |
Texas Instruments |
Sink and Source DDR Termination Regulator | |
11 | TPS51206 |
Texas Instruments |
2-A Peak Sink / Source DDR Termination Regulator | |
12 | TPS51220 |
Texas Instruments |
Notebook System Power Controller |