The TPS2300 and TPS2301 are dual-channel hotswap controllers that use external N-channel MOSFETs as high-side switches in power applications. Features of these devices, such as overcurrent protection (OCP), inrush current control, output-power status reporting, and the ability to discriminate between load transients and faults, are critical requirements for .
1
• Dual-Channel High-Side MOSFET Drivers
• IN1: 3 V to 13 V; IN2: 3 V to 5.5 V
• Output dV/dt Control Limits Inrush Current
• Circuit-Breaker With Programmable
Overcurrent Threshold and Transient Timer
• Power-Good Reporting With Transient Filter
• CMOS- and TTL-Compatible Enable Input
• Low, 5-μA Standby Supply Current (Max)
• Available in 20-Pin TSSOP Package
• 40°C to 85°C Ambient Temperature Range
• Electrostatic Discharge Protection
APPLICATIONS
• Hot-Swap/Plug/Dock Power Management
• Hot-Plug PCI, Device Bay
• Electronic Circuit Breaker
DESCRIPTION
The TPS2300 and TPS2301 are dual-chann.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPS2301 |
Texas Instruments |
DUAL HOT-SWAP POWER CONTROLLERS | |
2 | TPS2306 |
Texas Instruments |
DUAL SEQUENCING HOT SWAP POWER MANAGER | |
3 | TPS2310 |
Texas Instruments |
DUAL HOT-SWAP POWER CONTROLLERS | |
4 | TPS2311 |
Texas Instruments |
DUAL HOT-SWAP POWER CONTROLLERS | |
5 | TPS232 |
PerkinElmer Optoelectronics |
Thermopile Sensor | |
6 | TPS2320 |
Texas Instruments |
DUAL HOT SWAP POWER CONTROLLERS | |
7 | TPS2321 |
Texas Instruments |
DUAL HOT SWAP POWER CONTROLLERS | |
8 | TPS2330 |
Texas Instruments |
SINGLE HOT-SWAP POWER CONTROLLERS | |
9 | TPS2331 |
Texas Instruments |
SINGLE HOT-SWAP POWER CONTROLLERS | |
10 | TPS2342 |
Texas Instruments |
DUAL SLOT PCI-X 2.0 HOT PLUG POWER CONTROLLER | |
11 | TPS2343 |
Texas Instruments |
DUAL SLOT PCI-X 2.0 HOT PLUG POWER CONTROLLER | |
12 | TPS2345 |
Texas Instruments |
HOT SWAP POWER MANAGER |