The TPL0202 has two linear-taper digital potentiometers (DPOTs) with 256 wiper positions. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. The TPL0202-10 has an end-to-end resistance of 10 kΩ. This DPOT can be used as a mechanical potentiometer replacement, allowing the user (or software) to digitally control an.
•1 Two Potentiometers With 256-Position Resolution
• Non-Volatile Memory Stores Wiper Settings
• 10-kΩ End-to-End Resistance (TPL0202-10)
• Fast Power-Up Response Time: <100 µs
• ±1 LSB INL, ±0.5 LSB DNL (Voltage-Divider
Mode)
• 12 ppm/°C Ratiometric Temperature Coefficient
• SPI Serial Interface
• 2.7 to 5.5 V Single-Supply Operation
• Operating Temperature Range From
–40°C to +105°C
3 Description
The TPL0202 has two linear-taper digital potentiometers (DPOTs) with 256 wiper positions. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. The TPL0202.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPL0102 |
Texas Instruments |
Two 256-Taps Digital Potentiometers | |
2 | TPL0102-EP |
Texas Instruments |
256-Taps Dual-Channel Digital Potentiometer | |
3 | TPL0401A |
Texas Instruments |
128-TAPS Single-Channel Digital Potentiometer | |
4 | TPL0401A-10 |
Texas Instruments |
128-TAPS Single-Channel Digital Potentiometer | |
5 | TPL0401A-10-Q1 |
Texas Instruments |
128-TAPS Single-Channel Digital Potentiometer | |
6 | TPL0401B |
Texas Instruments |
128-TAPS Single-Channel Digital Potentiometer | |
7 | TPL0401B-10 |
Texas Instruments |
128-TAPS Single-Channel Digital Potentiometer | |
8 | TPL0401B-10-Q1 |
Texas Instruments |
128-TAPS Single-Channel Digital Potentiometer | |
9 | TPL0501 |
Texas Instruments |
Digital Potentiometer | |
10 | TPL0501-100 |
Texas Instruments |
Digital Potentiometer | |
11 | TPL0503S |
TOPPOWER |
2W 1.5KVDC Isolated Single Output DC/DC Converters | |
12 | TPL0503S-3W |
TOPPOWER |
3W 1.5KVDC Isolated Single Output DC/DC Converters |