The TPA3128D2 and TPA3129D2 have low idle power loss and helps to extend the battery life of Bluetooth/Wireless speakers and other batterypowered audio systems. The high efficiency of the TPA3128D2 device allows it to do 2 × 30 W without external heat sink on a dual layer PCB. The high efficiency of the TPA3129D2 device allows it to do 2 × 15 W without exter.
•1 Supports Multiple Output Configurations
– 2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3128D2)
– 2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3129D2)
• Wide Voltage Range: 4.5 V to 26 V
• Efficient Class-D Operation
– Very Low Idle Current: <23 mA for recommended LC filter configurations
– Greater than 90% Power Efficiency Combined With Low Idle Loss Greatly Eliminates Need for Heat Sink
– Adaptive Modulation Schemes based on Output Power
– Smart Amplifier Drivers to Reduce the Requirement for RC Snubbers
• Multiple Switching Frequencies
– AM Avoidance
– Master and Slave Synchronization
– 300-KHz t.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPA3120D2 |
Texas Instruments |
25-W STEREO CLASS-D AUDIO POWER AMPLIFIER | |
2 | TPA3121D2 |
Texas Instruments |
15-W STEREO CLASS-D AUDIO POWER AMPLIFIER | |
3 | TPA3122D2 |
Texas Instruments |
15-W STEREO CLASS-D AUDIO POWER AMPLIFIER | |
4 | TPA3123 |
Sure Electronics |
Class-D Audio Amplifier Board Manual | |
5 | TPA3123D2 |
Texas Instruments |
25-W STEREO CLASS-D AUDIO POWER AMPLIFIER | |
6 | TPA3124D2 |
Texas Instruments |
15-W STEREO CLASS-D AUDIO POWER AMPLIFIER | |
7 | TPA3125D2 |
Texas Instruments |
10-W STEREO CLASS-D AUDIO POWER AMPLIFIER | |
8 | TPA3126D2 |
Texas Instruments |
Class-D Audio Amplifier | |
9 | TPA3129D2 |
Texas Instruments |
Class-D Amplifier | |
10 | TPA3100D2 |
Texas Instruments |
20-W STEREO CLASS-D AUDIO POWER AMPLIFIER | |
11 | TPA3100D2-Q1 |
Texas Instruments |
20-W STEREO CLASS-D AUDIO POWER AMPLIFIER | |
12 | TPA3101D2 |
Texas Instruments |
10-W STEREO CLASS-D AUDIO POWER AMPLIFIER |