The TPA0103 is a 3-channel audio power amplifier in a 24-pin TSSOP thermal package primarily targeted at desktop PC or notebook applications. The left/right (L/R) channel outputs are single ended (SE) and capable of delivering 500 mW of continuous RMS power per channel into 4-Ω loads. The center channel output is a bridged tied load (BTL) configuration for .
Full power distortion levels of less than 0.25% THD+N into 4-Ω loads from a 5-V supply voltage are typical. Low-voltage application are also well served by the TPA0103 providing 800 mW to the center channel into 4-Ω loads with a 3.3-V supply voltage. Amplifier gain is externally configured by means of two resistors per input channel and does not require external compensation for settings of 1 to 10. A two channel input MUX circuit is integrated on the L/R channel inputs to allow two sets of stereo inputs to the amplifier. In the typical application, the center channel amplifier is driven fro.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPA0102 |
Texas Instruments |
1.5-W STEREO AUDIO POWER AMPLIFIER | |
2 | TPA0152 |
Texas Instruments |
2.8-W STEREO AUDIO POWER AMPLIFIER | |
3 | TPA0162 |
Texas Instruments |
2.8-W STEREO AUDIO POWER AMPLIFIER | |
4 | TPA0172 |
Texas Instruments |
2-W Stereo Audio Power Amplifier | |
5 | TPA0202 |
Texas Instruments |
2-W STEREO AUDIO POWER AMPLIFIER | |
6 | TPA0211 |
Texas Instruments |
2-W Mono Audio Power Amplifier | |
7 | TPA0212 |
Texas Instruments |
STEREO 2.6-W AUDIO POWER AMPLIFIER | |
8 | TPA0213 |
Texas Instruments |
2-W Mono Audio Power Amplifier | |
9 | TPA0223 |
Texas Instruments |
2-W MONO AUDIO POWER AMPLIFIER | |
10 | TPA0233 |
Texas Instruments |
2-W Mono Audio Power Amplifier | |
11 | TPA0253 |
Texas Instruments |
1-W MONO AUDIO POWER AMPLIFIER | |
12 | TPA0303DA |
TOPPOWER |
1W 3KVDC Isolated Single and Dual Output DC/DC Converters |