The TP6311 is a VFD (Vacuum Fluorescent Display) controller/driver that is driven on a 1/8 to 1/16-duty factor. It consists of 12 segment output lines, 8 grid output lines, 8 segment/grid output drivelines, a display memory, a control circuit, and a key scan circuit. Serial data is input to TP6311 through a This VFD controller/driver three-line serial interf.
Multiple display modes (12-segment & 16-digit to 20-segment & 8-digit) Key scanning (12×4 matrices) Dimming circuit (eight steps) High-voltage output (VDD
– 35V max) LED ports (5 chs, 20 mA max) General-purpose input port (4 bits) No external resistor necessary for driver outputs (P-ch open-drain + pull-down resistor output) Serial interface (CLK, STB, DIN, DOUT)
is ideal as a peripheral device of a single-chip
Ordering Information
TP 6311 Footprint Version Package Type Package Type Q: QFP Footprint L: 3.2 mm
Block Diagram
Command decoder DIN
Dimming circuit
16-bit output latch
DOUT Ser.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TP6311QG |
Tepro Technology |
1/8 - 1/16 DUTY VFD CONTROLLER / DRIVER | |
2 | TP6311 |
Tepro Technology |
1/8 TO 1/16 Duty VFD Controller | |
3 | TP6312 |
Tepro Technology |
1/4-Te1/11-duty FIP(VFD) controller/driver | |
4 | TP6317 |
Topro Technology |
1/4 to 1/11-Duty VFD Controller 11x11 to 16x4 (seg X Grid) | |
5 | TP6001 |
3Peak |
Op Amps | |
6 | TP6002 |
3Peak |
Op Amps | |
7 | TP6004 |
3Peak |
Op Amps | |
8 | TP608 |
TOPIC |
Non-isolated buck LED driver | |
9 | TP60P |
Siemens Semiconductor Group |
Silizium-Fotoelement Silicon Photovoltaic Cell | |
10 | TP61P |
Siemens Semiconductor Group |
Silizium-Fotoelement Silicon Photovoltaic Cell | |
11 | TP62601 |
Motorola Inc |
MICROWAVE POWER OSCILLATOR TRANSISTOR | |
12 | TP6273 |
TPOWER |
Current mode PWM power controller |