The TMP390 device is part of a family of ultra-low power, dual channel, resistor programmable temperature switches that enable protection and detection of system thermal events from –50°C to 130°C. The TMP390 offers independent overtemperature (hot) and undertemperature (cold) detection . The trip temperatures (TTRIP) and thermal hysteresis (THYST) options .
• Resistor programmable temperature trip points and hysteresis options
– Resistor tolerances contribute zero error
– Hysteresis options: 5°C, 10°C and 20°C
• Separate outputs for overtemperature or undertemperature detection
– Channel A (overtemperature): +30 to +124°C, 2°C steps
– Channel B (undertemperature):
–50 to +25°C, 5°C steps
• Accuracy level options (maximum at −55°C to +130°C):
– A2 Level: ±3.0°C (±1.5°C from 0°C to +70°C)
– A3 Level: ±3.5°C (±2.0°C from 0°C to +70°C)
• Ultra-low power consumption: 0.5 µA typical at 25°C
• Supply voltage: 1.62 to 5.5 V
• Open-drain outputs
• Trip t.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TMP390-Q1 |
Texas Instruments |
Resistor Programmable Temperature Switch | |
2 | TMP30 |
Trumpower |
30W Medical Power Adapters | |
3 | TMP300 |
Texas Instruments |
Resistor-Programmable Temperature Switch and Analog Out Temperature Sensor | |
4 | TMP300 |
Burr-Brown |
Resistor-Programmable TEMPERATURE SWITCH | |
5 | TMP300-Q1 |
Texas Instruments |
TEMPERATURE SWITCH and ANALOG OUT TEMPERATURE SENSOR | |
6 | TMP302 |
Texas Instruments |
Temperature Switch | |
7 | TMP302-Q1 |
Texas Instruments |
Temperature Switch | |
8 | TMP303 |
Texas Instruments |
Temperature Range-Monitor | |
9 | TMP320C40 |
Texas Instruments |
Digital Signal Processor | |
10 | TMP320C40KGDC |
Texas Instruments |
Digital Signal Processor | |
11 | TMP320C40KGDCT |
Texas Instruments |
Digital Signal Processor | |
12 | TMP35 |
Analog Devices |
Low Voltage Temperature Sensors |