The TLV61220 device provides a power-supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or onecell Li-Ion or Li-polymer battery. Possible output currents depend on the input-to-output voltage ratio. The boost converter is based on a hysteretic controller topology using synchronous rectification to ob.
•1 Up to 95% Efficiency at Typical Operating Conditions
• 5.5-μA Quiescent Current
• Startup Into Load at 0.7-V Input Voltage
• Operating Input Voltage from 0.7 V to 5.5 V
• Pass-Through Function during Shutdown
• Minimum Switching Current 200 mA
• Protections:
– Output Overvoltage
– Overtemperature
– Input Undervoltage Lockout
• Adjustable Output Voltage from 1.8 V to 5.5 V
• Small 6-pin Thin SOT-23 Package
2 Applications
• Battery Powered Applications
– 1 to 3 Cell Alkaline, NiCd or NiMH
– 1 Cell Li-Ion or Li-Primary
• Solar or Fuel Cell Powered Applications
• Consumer and Portable Medical P.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TLV61224 |
Texas Instruments |
Single-Cell High-Efficient Step-Up Converter | |
2 | TLV61225 |
Texas Instruments |
Single-Cell High-Efficient Step-Up Converter | |
3 | TLV61046A |
Texas Instruments |
28-V Output Voltage Boost Converter | |
4 | TLV61048 |
Texas Instruments |
14-V Output Voltage Non-synchronous Boost Converter | |
5 | TLV6001 |
Texas Instruments |
1-MHz Operational Amplifier | |
6 | TLV6002 |
Texas Instruments |
1-MHz Operational Amplifier | |
7 | TLV6004 |
Texas Instruments |
1-MHz Operational Amplifier | |
8 | TLV620612-Q1 |
Texas Instruments |
3-MHz 2-A Step-Down Converter | |
9 | TLV62065 |
Texas Instruments |
3-MHz 2-A Step-Down Converter | |
10 | TLV62065-Q1 |
Texas Instruments |
3-MHz 2-A Step-Down Converter | |
11 | TLV62080 |
Texas Instruments |
1.2-A and 2-A High-Efficiency Step-Down Converter | |
12 | TLV62084 |
Texas Instruments |
1.2-A and 2-A High-Efficiency Step-Down Converter |