TLRH262 - Toshiba Semiconductor

TLRH262 TOSHIBA LED Lamp InGaAP Red Light Emission

TLRH262 TOSHIBA LED Lamp InGaAℓP Red Light Emission TLRH262 Panel Circuit Indicator · · · · · · · · · 3.1 mm diameter (T1) InGaAℓP red LED All plastic mold type. Colorless clear lens Low drive current, high intensity red light emission Recommended forward current: IF = 1~20 mA (DC) All plastic molded lens, provides an excellent on−off contrast ratio. Fast r.

Features

mA VR = 4 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA Max 2.5 50 ¾ 414 ¾ ¾ ¾ Unit V µA mcd nm nm nm Peak emission wavelength Spectral line half width Dominant wavelength (Note): Lamps are classified into the following ranks according to their luminous intensity. Measurement tolerance for each limit is ±15%. N: 100-200 mcd, P: 180-360 mcd, Q: 320-640 mcd. 1 2002-09-25 TLRH262 Precaution
·
·
· Please be careful of the followings Soldering temperature: 260°C max Soldering time : 3 s max (soldering portion of lead: Up to 2 mm from the body of the device) If the lead is formed, the lead .