The THS6012 contains two high-speed drivers capable of providing 400 mA output current (min) into a 25 Ω load. These drivers can be configured differentially to drive a 50-VPP output signal over lowimpedance lines. The drivers are current feedback amplifiers, designed for the high slew rates necessary to support low total harmonic distortion (THD) in xDSL ap.
1
•2 ADSL Differential Line Driver
• 400 mA Minimum Output Current Into 25-Ω Load
• High Speed
– 140 MHz Bandwidth (-3dB) With 25-Ω Load
– 315 MHz Bandwidth (-3dB) With 100-Ω Load
– 1300 V/μs Slew Rate, G = 5
• Low Distortion
– -72 dB 3rd Order Harmonic Distortion at f = 1 MHz, 25-Ω Load, and 20 VPP
• Independent Power Supplies for Low Crosstalk
• Wide Supply Range ±4.5 V to ±16 V
• Thermal Shutdown and Short Circuit Protection
• Improved Replacement for AD815
• Evaluation Module Available
DESCRIPTION
The THS6012 contains two high-speed drivers capable of providing 400 mA output current (min) .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | THS6002 |
Texas Instruments |
Dual Differential Line Drivers/Receivers | |
2 | THS6022 |
Texas Instruments |
250-mA DUAL DIFFERENTIAL LINE DRIVER | |
3 | THS6032 |
Texas Instruments |
LOW-POWER ADSL CENTRAL-OFFICE LINE DRIVER | |
4 | THS6042 |
Texas Instruments |
ADSL CPE Line Drivers | |
5 | THS6043 |
Texas Instruments |
ADSL CPE Line Drivers | |
6 | THS6052 |
Texas Instruments |
ADSL CPE Line Drivers | |
7 | THS6053 |
Texas Instruments |
ADSL CPE Line Drivers | |
8 | THS6062 |
Texas Instruments |
LOW-NOISE ADSL DUAL DIFFERENTIAL RECEIVER | |
9 | THS6072 |
Texas Instruments |
LOW-POWER ADSL DIFFERENTIAL RECEIVER | |
10 | THS6092 |
Texas Instruments |
ADSL CPE Line Drivers | |
11 | THS6093 |
Texas Instruments |
ADSL CPE Line Drivers | |
12 | THS6132 |
Texas Instruments |
High Efficiency Class-G ADSL Line Driver |