The TEA2260/61 is a monolithic integrated circuit for the use in primary part of an off-line switching mode power supply. All functions required for SMPS control under normal operating, transient or abnormal conditions are provided. The capability of working according to the "masterslave" concept, or according to the "primary regulation" mode makes the TEA22.
the following functions : - Power supply start-up (with soft-start) - PWM generator - Direct power transistor drive (+1.2A, -2.0A) - Safety functions : pulse by pulse current limitation, output power limitation, over and under voltage lock-out. S.M.P.S. OPERATING DESCRIPTION Starting Mode - Stand By Mode Power for circuit supply is taken from the mains through a high value resistor before starting. As long as VCC of the TEA2260/61 is below VCC start, the quiescent current is very low (typically 0.7mA) and the electrolytic capacitor across VCC is linearly charged. When VCC reaches VCC start (ty.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TEA-2025 |
ST Microelectronics |
STEREO AUDIO AMPLIFIER | |
2 | TEA-566A |
NEC |
POWER MOSFET | |
3 | TEA0652 |
ETC |
(TEA0652 / TEA0654) MONOLITHISCHE STEREO IS | |
4 | TEA0654 |
ETC |
(TEA0652 / TEA0654) MONOLITHISCHE STEREO IS | |
5 | TEA0665 |
Philips |
Dolby B and C Type Noise Reduction Circuit | |
6 | TEA0665T |
Philips |
Dolby B and C Type Noise Reduction Circuit | |
7 | TEA0675 |
NXP |
Dual Dolby* B-type noise reduction circuit for playback applications | |
8 | TEA0675T |
NXP |
Dual Dolby* B-type noise reduction circuit for playback applications | |
9 | TEA0676 |
NXP |
Dual pre-amplifier and equalizer for reverse tape decks | |
10 | TEA0676T |
NXP |
Dual pre-amplifier and equalizer for reverse tape decks | |
11 | TEA0677 |
NXP |
Dual pre-amplifier and equalizer for reverse tape decks | |
12 | TEA0677T |
NXP |
Dual pre-amplifier and equalizer for reverse tape decks |