The TDA8946AJ is a dual-channel audio power amplifier with DC gain control. It has an output power of 2 × 15 W at an 8 Ω load and an 18 V supply. The circuit contains two Bridge-Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute logic. The overall gain can be adjusted from +30 dB down to −50 dB using a DC control voltage. This feature can.
s Gain/volume adjustment via a DC control pin s Soft clipping s Operating at a low supply voltage s Standby and mute mode s No on/off switching plops s Low standby current s High supply voltage ripple rejection s Outputs short-circuit protected to ground, supply and across the load s Thermally protected s Printed-circuit board compatible with TDA8944AJ and TDA8580J. 3. Applications s Mains fed applications (e.g. TV sound) s PC audio s Portable audio. 4. Quick reference data Table 1: Quick reference data Symbol Parameter VCC supply voltage Iq quiescent supply current Istb standby supply cur.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8946J |
NXP |
2 x 15 W stereo Bridge Tied Load BTL audio amplifier | |
2 | TDA8941P |
NXP |
1.5 W mono Bridge Tied Load BTL audio amplifier | |
3 | TDA8942P |
NXP |
2 x 1.5 W stereo Bridge Tied Load BTL audio amplifier | |
4 | TDA8943SF |
NXP |
6 W mono Bridge Tied Load BTL audio amplifier | |
5 | TDA8944AJ |
Philips |
2 x 7 W BTL audio amplifier | |
6 | TDA8944J |
NXP |
2 x 7 W stereo Bridge Tied Load BTL audio amplifier | |
7 | TDA8945S |
NXP |
15 W mono Bridge Tied Load BTL audio amplifier | |
8 | TDA8947J |
NXP |
4-channel audio amplifier | |
9 | TDA8948 |
ETC |
7W audio amplifier | |
10 | TDA8948J |
NXP Semiconductors |
4-channel audio amplifier | |
11 | TDA8920 |
NXP |
2 x 50 W class-D power amplifier | |
12 | TDA8920B |
NXP |
2 X 100 W class-D power amplifier |