TDA8568Q The TDA8568Q is a integrated class-B output amplifier in a 23-lead Single-In-Line (SIL) plastic power package. It contains four amplifiers in BTL configuration, each with a gain of 40 dB. The output power is 4 × 25 W in a 4 Ω load. APPLICATIONS • The device is primarily developed for car radio applications. TYP. 14.4 − 230 0.2 − 30 25 45 50 40 − .
• Requires very few external components
• High output power
• Low output offset voltage
• Fixed gain
• Diagnostic facility (distortion, short-circuit and temperature pre-warning)
• Good ripple rejection
• Mode select switch (operating, mute and standby)
• Load dump protection
• Short-circuit safe to ground and to VP and across the load
• Low power dissipation in any short-circuit condition
• Thermally protected
• Reverse polarity safe
• Electrostatic discharge protection
• No switch-on/switch-off plop
• Flexible leads
• Low thermal resistance
• Pin compatible with the TDA8567Q, except for the .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8560Q |
NXP |
2 x 40 W/2 ohm stereo BTL car radio power amplifier with diagnostic facility | |
2 | TDA8561Q |
NXP |
2 x 24 W BTL or 4 x 12 W single-ended car radio power amplifier | |
3 | TDA8562Q |
NXP |
4 x 12 W single-ended car radio power amplifier with dynamic distortion detector and diagnostic interface | |
4 | TDA8563AQ |
NXP |
stereo BTL car radio power amplifier | |
5 | TDA8563Q |
NXP |
stereo BTL car radio power amplifier | |
6 | TDA8564Q |
NXP |
2 x 24 W BTL or 4 x 12 W single-ended car radio power amplifier | |
7 | TDA8565Q |
NXP |
4 x 12 W single-ended car radio power amplifier with diagnostic interface | |
8 | TDA8566 |
NXP Semiconductors |
stereo BTL car radio power amplifier | |
9 | TDA8566Q |
NXP |
BTL stereo car radio power amplifier | |
10 | TDA8566TH |
NXP |
stereo BTL car radio power amplifier | |
11 | TDA8567Q |
NXP |
4 x 25 W BTL quad car radio power amplifier | |
12 | TDA8569Q |
NXP |
4 x 25W BTL quad car radio power amplifier |