TDA8543 The TDA8543(T) is a one channel audio power amplifier for an output power of 2 W with an 8 Ω load at a 7.5 V supply. The circuit contains a BTL amplifier with a complementary PNP-NPN output stage and standby/mute logic. The TDA8543T comes in a 16 pin SO package and the TDA8543 in a 16 pin DIP package. MAX. 18 12 10 − − − − − UNIT V mA µA W W W % .
• Flexibility in use
• Few external components
• Low saturation voltage of output stage
• Gain can be fixed with external resistors
• Standby mode controlled by CMOS compatible levels
• Low standby current
• No switch-on/switch-off plops
• High supply voltage ripple rejection
• Protected against electrostatic discharge
• Outputs short-circuit safe to ground, VCC and across the load
• Thermally protected. QUICK REFERENCE DATA SYMBOL VCC Iq Istb Po PARAMETER supply voltage quiescent current standby current output power THD = 10% RL = 8 Ω; VCC = 5 V RL = 8 Ω; VCC = 7.5 V RL = 16 Ω; VCC = 9 V THD .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8540 |
NXP |
4 X 4 video switch matrix | |
2 | TDA8541 |
NXP |
1 W BTL audio amplifier | |
3 | TDA8542 |
NXP |
2 x 1 W BTL audio amplifier | |
4 | TDA8542AT |
NXP |
2 x 1.5 W BTL audio amplifier | |
5 | TDA8542TS |
NXP |
2 x 0.7 W BTL audio amplifier | |
6 | TDA8547 |
NXP |
2 x 1 W BTL audio amplifier with output channel switching | |
7 | TDA8547TS |
NXP |
2 x 0.7 W BTL audio amplifier with output channel switching | |
8 | TDA8501 |
NXP |
PAL/NTSC encoder | |
9 | TDA8505 |
NXP |
SECAM encoder | |
10 | TDA8510J |
NXP |
26 W BTL and 2 x 13 W SE power amplifiers | |
11 | TDA8511J |
NXP |
4 x 13 W single-ended power amplifiers | |
12 | TDA8512J |
NXP |
26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier |