The TDA8023 is a complete cost-efficient, low-power analog interface for synchronous or asynchronous smart cards. It can be placed between the card and the microcontroller with very few external components to perform all supply, protection and control functions. 2. Features and benefits I2C-bus controlled IC card interface in TSSOP28 Supply voltage from .
I2C-bus controlled IC card interface in TSSOP28
Supply voltage from 2.7 V to 6.5 V
Independant supply voltage VDD(INTF) for interface signals with the microcontroller
Shutdown input for very low power consumption when the part is not used
Power reduction modes when the card is active
DC-to-DC converter for VCC generation (capacitive doubler, tripler, or inductive, or
follower automatically selected according to supply voltage and card voltage)
1 specific protected half duplex bidirectional buffered I/O line, with current limitation at
15 mA, maximum frequency 1 MHz
2 auxiliary.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8020HL |
NXP |
Dual smart card interface | |
2 | TDA8024 |
NXP |
Standard smart card interface | |
3 | TDA8025 |
NXP Semiconductors |
IC card interface | |
4 | TDA8026 |
NXP |
Multiple smart card slot interface | |
5 | TDA8029 |
NXP |
Low power single card reader | |
6 | TDA8000 |
NXP |
Smart card interface | |
7 | TDA8000T |
NXP |
Smart card interface | |
8 | TDA8001 |
NXP |
Smart card interface | |
9 | TDA8002 |
NXP |
IC card interface | |
10 | TDA8002C |
NXP |
IC card interface | |
11 | TDA8003TS |
NXP |
I2C-bus SIM card interface | |
12 | TDA8004AT |
NXP |
IC card interface |