The TDA7052A/AT are mono BTL output amplifiers with DC volume control. They are designed for use in TV and monitors, but also suitable for battery-fed portable recorders and radios. Missing Current Limiter (MCL) A MCL protection circuit is built-in. The MCL circuit is activated when the difference in current between the output terminal of each amplifier exce.
• DC volume control
• Few external components
• Mute mode
• Thermal protection
• Short-circuit proof
• No switch-on and off clicks
• Good overall stability
• Low power consumption
• Low HF radiation
• ESD protected on all pins
GENERAL DESCRIPTION
The TDA7052A/AT are mono BTL output amplifiers with DC volume control. They are designed for use in TV and monitors, but also suitable for battery-fed portable recorders and radios.
Missing Current Limiter (MCL)
A MCL protection circuit is built-in. The MCL circuit is activated when the difference in current between the output terminal of each amplif.
The UTC TDA7052A is mono BTL output amplifier with DC volume control. It is designed for use in TV and monitors, additi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA7052 |
NXP |
1 W BTL mono audio amplifier | |
2 | TDA7052AT |
NXP |
1 W BTL mono audio amplifier | |
3 | TDA7052B |
NXP |
Mono BTL audio amplifier | |
4 | TDA7050T |
NXP |
Low voltage mono/stereo power amplifier | |
5 | TDA7053 |
NXP |
2 x 1 W portable/mains-fed stereo power amplifier | |
6 | TDA7053A |
NXP |
Stereo BTL amplifier | |
7 | TDA7053A |
UTC |
STEREO BTL AUDIO OUTPUT AMPLIFIER | |
8 | TDA7056 |
NXP |
3 W mono BTL amplifier | |
9 | TDA7056A |
NXP |
3 W BTL mono audio amplifier | |
10 | TDA7056AT |
NXP |
3 W mono BTL audio amplifier | |
11 | TDA7056B |
NXP |
5 W mono BTL audio amplifier | |
12 | TDA7057AQ |
NXP |
2 x 8 W stereo BTL audio amplifier |