The TDA5146T is a bipolar integrated circuit used to drive brushless DC motors in full–wave mode. The device senses the rotor position using an EMF –sensing technique and is ideally suited as a drive circuit for a hard disk drive motor or tape drive. QUICK REFERENCE DATA Measured over full voltage and temperature ranges Symbol VP Vsup VVMOT VDo ILIM Paramet.
• Full
–wave commutation (using push/pull drivers at the output stages) without position sensors
• Built
–in start
–up circuit
• Three push
–pull outputs:
– 2 A output current (Typical)
– Built
–in current limiter
• Thermal protection
• Soft switching outputs
• Flyback diodes
• Tacho output sensor
• Brake function
• Direction control input
• Reset function
• FET driver stage to be used in a buck converter
APPLICATIONS
General purpose spindle driver (e.g., HDD, tape driver)
GENERAL DESCRIPTION
The TDA5146T is a bipolar integrated circuit used to drive brushless DC motors in full
–wave mode. The de.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA5140A |
NXP |
Brushless DC motor drive circuit | |
2 | TDA5141 |
NXP |
Brushless DC motor drive circuit | |
3 | TDA5142T |
NXP |
Brushless DC motor drive circuit | |
4 | TDA5143T |
NXP |
Brushless DC motor drive circuit | |
5 | TDA5144 |
NXP |
Brushless DC motor drive circuit | |
6 | TDA5145 |
NXP |
Brushless DC motor drive circuit | |
7 | TDA5147CH |
NXP |
12 V Voice Coil Motor VCM driver and spindle motor drive combination chip | |
8 | TDA5147K |
NXP |
12 V Voice Coil Motor VCM driver and spindle motor drive combination chip | |
9 | TDA5149G |
NXP |
12 V Voice Coil Motor VCM driver and spindle motor pre-driver combination chip | |
10 | TDA5100A |
Infineon Technologies |
ASK Transmitter 434 MHz | |
11 | TDA5101A |
Infineon Technologies |
ASK Transmitter 315 MHz | |
12 | TDA5102 |
Infineon Technologies |
ASK/FSK Transmitter 915 MHz |