TDA4504B Having the capability to demodulate IF signals with either positive or negative-going video information, the TDA4504B (Fig.1) is contained within a 32 pin encapsulation. It includes a three-stage vision IF amplifier, mute circuit, AFC and AGC circuitry, fully synchronised horizontal and vertical timebases with drive circuits and integral three-lev.
• Gain controlled vision IF amplifier
• Synchronous demodulator for negative and positive demodulation
• AGC detector operating on peak sync amplitude for negative demodulation and on peak white level for positive demodulation
• Tuner AGC
• AFC circuit with two control polarities and on/off-switch
• Video preamplifier
• Video switch to select either the internal video signal or an external video signal
• Horizontal oscillator and synchronization circuit with two control loops
• Vertical synchronization (divider system), ramp generator and driver with automatic amplitude adjustment for 50 and 6.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA4500 |
ETC |
SMALL SIGNAL COMBINATION IC FOR MONOCHROME TV | |
2 | TDA4501 |
NXP |
SMALL SIGNAL COMBINATION IC FOR COLOUR TV | |
3 | TDA4502A |
NXP |
SMALL SIGNAL COMBINATION IC FOR COLOUR TV | |
4 | TDA4503 |
NXP |
SMALL-SIGINAL COMBINATION IC FOR BLACK-AND-WHITE TV | |
5 | TDA4505 |
NXP |
Small signal combination IC for colour TV | |
6 | TDA4510 |
NXP |
PAL decoder | |
7 | TDA4555 |
NXP |
Multistandard decoder | |
8 | TDA4556 |
NXP |
Multistandard decoder | |
9 | TDA4557 |
NXP |
Multistandard decoder | |
10 | TDA4558 |
TY Semiconductor |
High performance operational amplifier | |
11 | TDA4560 |
NXP |
Colour transient improvement circuit | |
12 | TDA4565 |
NXP |
Colour transient improvement circuit |