The TDA3843 performs the AM-sound demodulation for the L- and L’-standard. Features • 5 to 8 V power supply and an alternative 12 V power supply • Low power consumption (200 mW) at 5 V supply voltage • New AC-coupled wideband IF-amplifier (high dynamic ranges, less intermodulation) • In-phase wideband AM demodulator without external reference circuit • Reduc.
• 5 to 8 V power supply and an alternative 12 V power supply
• Low power consumption (200 mW) at 5 V supply voltage
• New AC-coupled wideband IF-amplifier (high dynamic ranges, less intermodulation)
• In-phase wideband AM demodulator without external reference circuit
• Reduced THD figures even for low AF frequencies (typical 1%)
• Stabilizer circuit for ripple rejection and constant output signals
• All pins are ESD protected QUICK REFERENCE DATA PARAMETER Supply voltage (pin 14) Supply voltage (pin 11) Supply current Minimum IF input (RMS value) IF control range AF output signal (RMS value) .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA3840 |
Philips |
TV IF Amplifier and Demodulator | |
2 | TDA3842 |
Philips |
Multistandard TV IF amplifier and demodulator | |
3 | TDA3845 |
NXP |
Quasi split-sound circuit and AM demodulator | |
4 | TDA3845T |
NXP |
Quasi split-sound circuit and AM demodulator | |
5 | TDA3800G |
ETC |
STEREO/DUAL TV SOUND PROCESSING CIRCUITS | |
6 | TDA3800GS |
ETC |
STEREO/DUAL TV SOUND PROCESSING CIRCUITS | |
7 | TDA3803A |
NXP |
Stereo/dual TV sound decoder circuit | |
8 | TDA3810 |
NXP |
Spatial/ stereo and pseudo-stereo sound circuit | |
9 | TDA3825 |
NXP |
Single FM TV-sound demodulator circuit | |
10 | TDA3827 |
NXP |
TV-sound demodulator circuit with SCART switches and AF control | |
11 | TDA3833 |
NXP |
BTSC-stereo/SAP/DBX decoder and DBX expander | |
12 | TDA3853T |
NXP |
TV IF amplifier and demodulator with TV-identification |