TDA1596 The TDA1596 provides IF amplification, symmetrical quadrature demodulation and level detection for quality home and car FM radio receivers and is suitable for both mono and stereo reception. It may also be applied to common front-ends, stereo decoders and AM receiver circuits. Features • Simulates behaviour of a ratio detector (internal field stren.
• Simulates behaviour of a ratio detector (internal field strength and detuning-dependent voltage for dynamic AF signal muting)
• Mono/stereo blend and field strength indication control voltage
• Three-state mode switch for FM, mute-on / FM, mute-off / FM-off
• Internal compensation of AF signal total harmonic distortion (THD)
• Two open collector stop pulse outputs for microcomputer tuning control (can be one stop pulse output by wired-ANDing)
• Internal reference voltage source
• Built-in hum and ripple rejection circuits QUICK REFERENCE DATA PARAMETER Supply voltage (pin 1) Supply current (.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA1591 |
NXP |
PLL stereo decoder and noise blanker | |
2 | TDA1592 |
NXP |
PLL stereo decoder and noise blanker | |
3 | TDA1593 |
NXP |
FM car radio receivers IF amplifier/demodulator | |
4 | TDA1596T |
NXP |
IF amplifier/demodulator | |
5 | TDA1597 |
NXP |
IF amplifier/demodulator | |
6 | TDA1599 |
NXP |
IF amplifier/demodulator | |
7 | TDA150-002 |
BOE |
XGA TFT-LCD | |
8 | TDA150-004 |
BOE |
TFT LCD | |
9 | TDA1510 |
Philips |
24W BTL or 2 x 12W stereo car radio power amplifier | |
10 | TDA1510A |
Philips |
24W BTL or 2 x 12W stereo car radio power amplifier | |
11 | TDA1510AQ |
NXP |
24 W BTL or 2 x 12 W stereo car radio power amplifier | |
12 | TDA1512A |
ETC |
12W TO 20W HI FI AUDIO POWER AMPLIFIER |