The TAT7472A1F is a 75 Ω RF Amplifier designed for CATV use, but capable of operation up to 1218 MHz. The TAT7472 A1F contains two separate amplifiers for push pull applications. It is fabricated using 6-inch GaAs pHEMT technology to optimize performance and cost. Each amplifier contains on-chip active biasing. The bias current set point of each amplifier is.
75 Ω, 50 MHz to 1218 MHz Bandwidth
Low Noise Figure: < 3 dB
pHEMT Device Technology
SOIC-8 Package
Enhanced Gain and Bandwidth
Adjustable Bias
General Description
The TAT7472A1F is a 75 Ω RF Amplifier designed for CATV use, but capable of operation up to 1218 MHz. The TAT7472 A1F contains two separate amplifiers for push pull applications. It is fabricated using 6-inch GaAs pHEMT technology to optimize performance and cost. Each amplifier contains on-chip active biasing. The bias current set point of each amplifier is adjustable with a single resistor from the input to ground.
Typi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TAT7427B |
TRIACCESS |
75 Ohm RF Amplifier | |
2 | TAT7427B |
TriQuint Semiconductor |
75 Ohm RF Amplifier | |
3 | TAT7430B |
TriQuint Semiconductor |
75 Ohm RF Amplifier | |
4 | TAT7457 |
TriQuint Semiconductor |
CATV 75 Ohm pHEMT Adjustable Gain RF Amplifier | |
5 | TAT7460 |
TriQuint Semiconductor |
75 Ohm RF Amplifier | |
6 | TAT7461 |
TriQuint Semiconductor |
75 Ohm RF Amplifier | |
7 | TAT7464 |
TriQuint Semiconductor |
75 Ohm RF Amplifier | |
8 | TAT7466 |
TriQuint Semiconductor |
75 Ohm RF Amplifier | |
9 | TAT7467H |
TriQuint Semiconductor |
75 Ohm RF Amplifier | |
10 | TAT7469 |
TriQuint Semiconductor |
75 Ohm RF Amplifier | |
11 | TAT07 |
EM |
128 X 64 OLED Module | |
12 | TAT2814A |
TriQuint Semiconductor |
DOCSIS 3.0 / Edge QAM Variable Gain Amplifier |