is made only on the single channel.) This IC has the amplifier construction as shown Fig.1. The pre−amp (amp 1) is provided to the primary stage, and the input voltage is amplified by the flat amps, amp 3 and amp 4 of each channel through the phase amp (amp 2). Since the input offset is prevented by pre−amp when VCC is set to on, this circuit can remarkably.
due to the temperature rise at the high output can also be reduced. This stereo audio power IC, designed for car audio use, has two built−in channels to reduce the characteristic difference between L and R channels. It also contains various kind of protection.
TA8221AHQ
TA8221ALQ
Features
•
• Low thermal resistance : θj−T = 1.5°C / W (infinite heat sink) High power : POUT (1) = 30W (typ.) / channel (VCC = 14.4V, f = 1kHz, THD = 10%, RL =2Ω) POUT (2) = 26W (typ.) / channel (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 2Ω) POUT (3) = 19W (typ.) / channel (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω) .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TA8221AH |
Toshiba Semiconductor |
30W BTL x 2CH AUDIO POWER AMPLIFIER | |
2 | TA8221AL |
Toshiba Semiconductor |
30W BTL x 2CH AUDIO POWER AMPLIFIER | |
3 | TA8221ALQ |
Toshiba |
Audio Power Amplifier | |
4 | TA8220H |
Toshiba Semiconductor |
30W BTL x 2CH AUDIO POWER AMPLIFIER | |
5 | TA8223K |
Toshiba |
LOW FREQUENCY POWER AMPLIFIER | |
6 | TA8224H |
Toshiba Semiconductor |
MULTI OUTPUT VOLTAGE REGULATOR FOR CD PLAYER | |
7 | TA8225H |
Toshiba Semiconductor |
45W BTL AUDIO AMPLIFIER | |
8 | TA8225L |
Toshiba Semiconductor |
45W BTL AUDIO AMPLIFIER | |
9 | TA8227AP |
UTC |
LOW FREQUENCY POWER AMPLIFIER | |
10 | TA8227P |
Toshiba |
LOW FREQUENCY POWER AMPLIFIER | |
11 | TA8227P |
UTC |
LOW FREQUENCY POWER AMPLIFIER | |
12 | TA8227P |
SUM |
LOW FREQUENCY POWER AMPLIFIER |